diff --git a/.config/lazygit/config.yml b/.config/lazygit/config.yml new file mode 100644 index 0000000..6e8478d --- /dev/null +++ b/.config/lazygit/config.yml @@ -0,0 +1,590 @@ +# https://github.com/jesseduffield/lazygit/blob/master/docs/Config.md +# Config relating to the Lazygit UI +gui: + # The number of lines you scroll by when scrolling the main window + scrollHeight: 2 + + # If true, allow scrolling past the bottom of the content in the main window + scrollPastBottom: true + + # See https://github.com/jesseduffield/lazygit/blob/master/docs/Config.md#scroll-off-margin + scrollOffMargin: 2 + + # One of: 'margin' (default) | 'jump' + scrollOffBehavior: margin + + # If true, capture mouse events. + # When mouse events are captured, it's a little harder to select text: e.g. requiring you to hold the option key when on macOS. + mouseEvents: true + + # If true, do not show a warning when discarding changes in the staging view. + skipDiscardChangeWarning: false + + # If true, do not show warning when applying/popping the stash + skipStashWarning: false + + # If true, do not show a warning when attempting to commit without any staged files; instead stage all unstaged files. + skipNoStagedFilesWarning: false + + # If true, do not show a warning when rewording a commit via an external editor + skipRewordInEditorWarning: false + + # Fraction of the total screen width to use for the left side section. You may want to pick a small number (e.g. 0.2) if you're using a narrow screen, so that you can see more of the main section. + # Number from 0 to 1.0. + sidePanelWidth: 0.3333 + + # If true, increase the height of the focused side window; creating an accordion effect. + expandFocusedSidePanel: false + + # The weight of the expanded side panel, relative to the other panels. 2 means + # twice as tall as the other panels. Only relevant if `expandFocusedSidePanel` is true. + expandedSidePanelWeight: 2 + + # Sometimes the main window is split in two (e.g. when the selected file has both staged and unstaged changes). This setting controls how the two sections are split. + # Options are: + # - 'horizontal': split the window horizontally + # - 'vertical': split the window vertically + # - 'flexible': (default) split the window horizontally if the window is wide enough, otherwise split vertically + mainPanelSplitMode: flexible + + # How the window is split when in half screen mode (i.e. after hitting '+' once). + # Possible values: + # - 'left': split the window horizontally (side panel on the left, main view on the right) + # - 'top': split the window vertically (side panel on top, main view below) + enlargedSideViewLocation: left + + # One of 'auto' (default) | 'en' | 'zh-CN' | 'zh-TW' | 'pl' | 'nl' | 'ja' | 'ko' | 'ru' + language: auto + + # Format used when displaying time e.g. commit time. + # Uses Go's time format syntax: https://pkg.go.dev/time#Time.Format + timeFormat: 02 Jan 06 + + # Format used when displaying time if the time is less than 24 hours ago. + # Uses Go's time format syntax: https://pkg.go.dev/time#Time.Format + shortTimeFormat: 3:04PM + + # Config relating to colors and styles. + # See https://github.com/jesseduffield/lazygit/blob/master/docs/Config.md#color-attributes + theme: + # Border color of focused window + activeBorderColor: + - green + - bold + + # Border color of non-focused windows + inactiveBorderColor: + - default + + # Border color of focused window when searching in that window + searchingActiveBorderColor: + - cyan + - bold + + # Color of keybindings help text in the bottom line + optionsTextColor: + - blue + + # Background color of selected line. + # See https://github.com/jesseduffield/lazygit/blob/master/docs/Config.md#highlighting-the-selected-line + selectedLineBgColor: + - blue + + # Background color of selected line when view doesn't have focus. + inactiveViewSelectedLineBgColor: + - bold + + # Foreground color of copied commit + cherryPickedCommitFgColor: + - blue + + # Background color of copied commit + cherryPickedCommitBgColor: + - cyan + + # Foreground color of marked base commit (for rebase) + markedBaseCommitFgColor: + - blue + + # Background color of marked base commit (for rebase) + markedBaseCommitBgColor: + - yellow + + # Color for file with unstaged changes + unstagedChangesColor: + - red + + # Default text color + defaultFgColor: + - default + + # Config relating to the commit length indicator + commitLength: + # If true, show an indicator of commit message length + show: true + + # If true, show the '5 of 20' footer at the bottom of list views + showListFooter: true + + # If true, display the files in the file views as a tree. If false, display the files as a flat list. + # This can be toggled from within Lazygit with the '~' key, but that will not change the default. + showFileTree: false + + # If true, show a random tip in the command log when Lazygit starts + showRandomTip: true + + # If true, show the command log + showCommandLog: true + + # If true, show the bottom line that contains keybinding info and useful buttons. If false, this line will be hidden except to display a loader for an in-progress action. + showBottomLine: true + + # If true, show jump-to-window keybindings in window titles. + showPanelJumps: true + + # Deprecated: use nerdFontsVersion instead + showIcons: false + + # Nerd fonts version to use. + # One of: '2' | '3' | empty string (default) + # If empty, do not show icons. + nerdFontsVersion: "3" + + # If true (default), file icons are shown in the file views. Only relevant if NerdFontsVersion is not empty. + showFileIcons: true + + # Length of author name in (non-expanded) commits view. 2 means show initials only. + commitAuthorShortLength: 2 + + # Length of author name in expanded commits view. 2 means show initials only. + commitAuthorLongLength: 17 + + # Length of commit hash in commits view. 0 shows '*' if NF icons aren't on. + commitHashLength: 8 + + # If true, show commit hashes alongside branch names in the branches view. + showBranchCommitHash: false + + # Whether to show the divergence from the base branch in the branches view. + # One of: 'none' | 'onlyArrow' | 'arrowAndNumber' + showDivergenceFromBaseBranch: none + + # Height of the command log view + commandLogSize: 8 + + # Whether to split the main window when viewing file changes. + # One of: 'auto' | 'always' + # If 'auto', only split the main window when a file has both staged and unstaged changes + splitDiff: auto + + # Default size for focused window. Window size can be changed from within Lazygit with '+' and '_' (but this won't change the default). + # One of: 'normal' (default) | 'half' | 'full' + windowSize: normal + + # Window border style. + # One of 'rounded' (default) | 'single' | 'double' | 'hidden' + border: rounded + + # If true, show a seriously epic explosion animation when nuking the working tree. + animateExplosion: true + + # Whether to stack UI components on top of each other. + # One of 'auto' (default) | 'always' | 'never' + portraitMode: auto + + # How things are filtered when typing '/'. + # One of 'substring' (default) | 'fuzzy' + filterMode: substring + + # Config relating to the spinner. + spinner: + # The frames of the spinner animation. + frames: + - '|' + - / + - '-' + - \ + + # The "speed" of the spinner in milliseconds. + rate: 50 + + # Status panel view. + # One of 'dashboard' (default) | 'allBranchesLog' + statusPanelView: dashboard + + # If true, jump to the Files panel after popping a stash + switchToFilesAfterStashPop: true + + # If true, jump to the Files panel after applying a stash + switchToFilesAfterStashApply: true + +# Config relating to git +git: + # See https://github.com/jesseduffield/lazygit/blob/master/docs/Custom_Pagers.md + paging: + # Value of the --color arg in the git diff command. Some pagers want this to be set to 'always' and some want it set to 'never' + colorArg: always + + # e.g. + # diff-so-fancy + # delta --dark --paging=never + # ydiff -p cat -s --wrap --width={{columnWidth}} + pager: "" + + # If true, Lazygit will use whatever pager is specified in `$GIT_PAGER`, `$PAGER`, or your *git config*. If the pager ends with something like ` | less` we will strip that part out, because less doesn't play nice with our rendering approach. If the custom pager uses less under the hood, that will also break rendering (hence the `--paging=never` flag for the `delta` pager). + useConfig: false + + # e.g. 'difft --color=always' + externalDiffCommand: "" + + # Config relating to committing + commit: + # If true, pass '--signoff' flag when committing + signOff: false + + # Automatic WYSIWYG wrapping of the commit message as you type + autoWrapCommitMessage: true + + # If autoWrapCommitMessage is true, the width to wrap to + autoWrapWidth: 72 + + # Config relating to merging + merging: + # If true, run merges in a subprocess so that if a commit message is required, Lazygit will not hang + # Only applicable to unix users. + manualCommit: false + + # Extra args passed to `git merge`, e.g. --no-ff + args: "" + + # The commit message to use for a squash merge commit. Can contain "{{selectedRef}}" and "{{currentBranch}}" placeholders. + squashMergeMessage: Squash merge {{selectedRef}} into {{currentBranch}} + + # list of branches that are considered 'main' branches, used when displaying commits + mainBranches: + - master + - main + + # Prefix to use when skipping hooks. E.g. if set to 'WIP', then pre-commit hooks will be skipped when the commit message starts with 'WIP' + skipHookPrefix: WIP + + # If true, periodically fetch from remote + autoFetch: true + + # If true, periodically refresh files and submodules + autoRefresh: true + + # If true, pass the --all arg to git fetch + fetchAll: true + + # If true, lazygit will automatically stage files that used to have merge + # conflicts but no longer do; and it will also ask you if you want to + # continue a merge or rebase if you've resolved all conflicts. If false, it + # won't do either of these things. + autoStageResolvedConflicts: true + + # Command used when displaying the current branch git log in the main window + branchLogCmd: git log --graph --color=always --abbrev-commit --decorate --date=relative --pretty=medium {{branchName}} -- + + # Command used to display git log of all branches in the main window. + # Deprecated: User `allBranchesLogCmds` instead. + allBranchesLogCmd: git log --graph --all --color=always --abbrev-commit --decorate --date=relative --pretty=medium + + # If true, do not spawn a separate process when using GPG + overrideGpg: false + + # If true, do not allow force pushes + disableForcePushing: false + + # See https://github.com/jesseduffield/lazygit/blob/master/docs/Config.md#predefined-commit-message-prefix + commitPrefix: + # pattern to match on. E.g. for 'feature/AB-123' to match on the AB-123 use "^\\w+\\/(\\w+-\\w+).*" + pattern: "" + + # Replace directive. E.g. for 'feature/AB-123' to start the commit message with 'AB-123 ' use "[$1] " + replace: "" + + # See https://github.com/jesseduffield/lazygit/blob/master/docs/Config.md#predefined-branch-name-prefix + branchPrefix: "" + + # If true, parse emoji strings in commit messages e.g. render :rocket: as 🚀 + # (This should really be under 'gui', not 'git') + parseEmoji: true + + # Config for showing the log in the commits view + log: + # One of: 'date-order' | 'author-date-order' | 'topo-order' | 'default' + # 'topo-order' makes it easier to read the git log graph, but commits may not + # appear chronologically. See https://git-scm.com/docs/ + # + # Deprecated: Configure this with `Log menu -> Commit sort order` ( in the commits window by default). + order: topo-order + + # This determines whether the git graph is rendered in the commits panel + # One of 'always' | 'never' | 'when-maximised' + # + # Deprecated: Configure this with `Log menu -> Show git graph` ( in the commits window by default). + showGraph: always + + # displays the whole git graph by default in the commits view (equivalent to passing the `--all` argument to `git log`) + showWholeGraph: false + + # When copying commit hashes to the clipboard, truncate them to this + # length. Set to 40 to disable truncation. + truncateCopiedCommitHashesTo: 12 + +# Periodic update checks +update: + # One of: 'prompt' (default) | 'background' | 'never' + method: prompt + + # Period in days between update checks + days: 14 + +# Background refreshes +refresher: + # File/submodule refresh interval in seconds. + # Auto-refresh can be disabled via option 'git.autoRefresh'. + refreshInterval: 10 + + # Re-fetch interval in seconds. + # Auto-fetch can be disabled via option 'git.autoFetch'. + fetchInterval: 60 + +# If true, show a confirmation popup before quitting Lazygit +confirmOnQuit: false + +# If true, exit Lazygit when the user presses escape in a context where there is nothing to cancel/close +quitOnTopLevelReturn: false + +# Config relating to things outside of Lazygit like how files are opened, copying to clipboard, etc +os: + # Command for editing a file. Should contain "{{filename}}". + edit: "" + + # Command for editing a file at a given line number. Should contain + # "{{filename}}", and may optionally contain "{{line}}". + editAtLine: "" + + # Same as EditAtLine, except that the command needs to wait until the + # window is closed. + editAtLineAndWait: "" + + # For opening a directory in an editor + openDirInEditor: "" + + # A built-in preset that sets all of the above settings. Supported presets + # are defined in the getPreset function in editor_presets.go. + editPreset: "" + + # Command for opening a file, as if the file is double-clicked. Should + # contain "{{filename}}", but doesn't support "{{line}}". + open: "" + + # Command for opening a link. Should contain "{{link}}". + openLink: "" + + # EditCommand is the command for editing a file. + # Deprecated: use Edit instead. Note that semantics are different: + # EditCommand is just the command itself, whereas Edit contains a + # "{{filename}}" variable. + editCommand: "" + + # EditCommandTemplate is the command template for editing a file + # Deprecated: use EditAtLine instead. + editCommandTemplate: "" + + # OpenCommand is the command for opening a file + # Deprecated: use Open instead. + openCommand: "" + + # OpenLinkCommand is the command for opening a link + # Deprecated: use OpenLink instead. + openLinkCommand: "" + + # CopyToClipboardCmd is the command for copying to clipboard. + # See https://github.com/jesseduffield/lazygit/blob/master/docs/Config.md#custom-command-for-copying-to-and-pasting-from-clipboard + copyToClipboardCmd: "" + + # ReadFromClipboardCmd is the command for reading the clipboard. + # See https://github.com/jesseduffield/lazygit/blob/master/docs/Config.md#custom-command-for-copying-to-and-pasting-from-clipboard + readFromClipboardCmd: "" + +# If true, don't display introductory popups upon opening Lazygit. +disableStartupPopups: false + +# What to do when opening Lazygit outside of a git repo. +# - 'prompt': (default) ask whether to initialize a new repo or open in the most recent repo +# - 'create': initialize a new repo +# - 'skip': open most recent repo +# - 'quit': exit Lazygit +notARepository: prompt + +# If true, display a confirmation when subprocess terminates. This allows you to view the output of the subprocess before returning to Lazygit. +promptToReturnFromSubprocess: true + +# Keybindings +keybinding: + universal: + quit: q + quit-alt1: + return: + quitWithoutChangingDirectory: Q + togglePanel: + prevItem: + nextItem: + prevItem-alt: k + nextItem-alt: j + prevPage: ',' + nextPage: . + scrollLeft: H + scrollRight: L + gotoTop: < + gotoBottom: '>' + toggleRangeSelect: v + rangeSelectDown: + rangeSelectUp: + prevBlock: + nextBlock: + prevBlock-alt: h + nextBlock-alt: l + nextBlock-alt2: + prevBlock-alt2: + jumpToBlock: + - "1" + - "2" + - "3" + - "4" + - "5" + nextMatch: "n" + prevMatch: "N" + startSearch: / + optionMenu: + optionMenu-alt1: '?' + select: + goInto: + confirm: + confirmInEditor: + remove: d + new: "n" + edit: e + openFile: o + scrollUpMain: + scrollDownMain: + scrollUpMain-alt1: K + scrollDownMain-alt1: J + scrollUpMain-alt2: + scrollDownMain-alt2: + executeShellCommand: ':' + createRebaseOptionsMenu: m + + # 'Files' appended for legacy reasons + pushFiles: P + + # 'Files' appended for legacy reasons + pullFiles: p + refresh: R + createPatchOptionsMenu: + nextTab: ']' + prevTab: '[' + nextScreenMode: + + prevScreenMode: _ + undo: z + redo: + filteringMenu: + diffingMenu: W + diffingMenu-alt: + copyToClipboard: + openRecentRepos: + submitEditorText: + extrasMenu: '@' + toggleWhitespaceInDiffView: + increaseContextInDiffView: '}' + decreaseContextInDiffView: '{' + increaseRenameSimilarityThreshold: ) + decreaseRenameSimilarityThreshold: ( + openDiffTool: + status: + checkForUpdate: u + recentRepos: + allBranchesLogGraph: a + files: + commitChanges: c + commitChangesWithoutHook: w + amendLastCommit: A + commitChangesWithEditor: C + findBaseCommitForFixup: + confirmDiscard: x + ignoreFile: i + refreshFiles: r + stashAllChanges: s + viewStashOptions: S + toggleStagedAll: a + viewResetOptions: D + fetch: f + toggleTreeView: '`' + openMergeTool: M + openStatusFilter: + copyFileInfoToClipboard: "y" + branches: + createPullRequest: o + viewPullRequestOptions: O + copyPullRequestURL: + checkoutBranchByName: c + forceCheckoutBranch: F + rebaseBranch: r + renameBranch: R + mergeIntoCurrentBranch: M + viewGitFlowOptions: i + fastForward: f + createTag: T + pushTag: P + setUpstream: u + fetchRemote: f + sortOrder: s + worktrees: + viewWorktreeOptions: w + commits: + squashDown: s + renameCommit: r + renameCommitWithEditor: R + viewResetOptions: g + markCommitAsFixup: f + createFixupCommit: F + squashAboveCommits: S + moveDownCommit: + moveUpCommit: + amendToCommit: A + resetCommitAuthor: a + pickCommit: p + revertCommit: t + cherryPickCopy: C + pasteCommits: V + markCommitAsBaseForRebase: B + tagCommit: T + checkoutCommit: + resetCherryPick: + copyCommitAttributeToClipboard: "y" + openLogMenu: + openInBrowser: o + viewBisectOptions: b + startInteractiveRebase: i + amendAttribute: + resetAuthor: a + setAuthor: A + addCoAuthor: c + stash: + popStash: g + renameStash: r + commitFiles: + checkoutCommitFile: c + main: + toggleSelectHunk: a + pickBothHunks: b + editSelectHunk: E + submodules: + init: i + update: u + bulkMenu: b + commitMessage: + commitMenu: diff --git a/.config/nvim/.stylua.toml b/.config/nvim/.stylua.toml new file mode 100644 index 0000000..139e939 --- /dev/null +++ b/.config/nvim/.stylua.toml @@ -0,0 +1,6 @@ +column_width = 160 +line_endings = "Unix" +indent_type = "Spaces" +indent_width = 2 +quote_style = "AutoPreferSingle" +call_parentheses = "None" diff --git a/.config/nvim/LICENSE.md b/.config/nvim/LICENSE.md new file mode 100644 index 0000000..9cf1062 --- /dev/null +++ b/.config/nvim/LICENSE.md @@ -0,0 +1,19 @@ +MIT License + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. diff --git a/.config/nvim/README.md b/.config/nvim/README.md new file mode 100644 index 0000000..800ca99 --- /dev/null +++ b/.config/nvim/README.md @@ -0,0 +1,233 @@ +# kickstart.nvim + +## Introduction + +A starting point for Neovim that is: + +* Small +* Single-file +* Completely Documented + +**NOT** a Neovim distribution, but instead a starting point for your configuration. + +## Installation + +### Install Neovim + +Kickstart.nvim targets *only* the latest +['stable'](https://github.com/neovim/neovim/releases/tag/stable) and latest +['nightly'](https://github.com/neovim/neovim/releases/tag/nightly) of Neovim. +If you are experiencing issues, please make sure you have the latest versions. + +### Install External Dependencies + +External Requirements: +- Basic utils: `git`, `make`, `unzip`, C Compiler (`gcc`) +- [ripgrep](https://github.com/BurntSushi/ripgrep#installation) +- Clipboard tool (xclip/xsel/win32yank or other depending on platform) +- A [Nerd Font](https://www.nerdfonts.com/): optional, provides various icons + - if you have it set `vim.g.have_nerd_font` in `init.lua` to true +- Language Setup: + - If you want to write Typescript, you need `npm` + - If you want to write Golang, you will need `go` + - etc. + +> **NOTE** +> See [Install Recipes](#Install-Recipes) for additional Windows and Linux specific notes +> and quick install snippets + +### Install Kickstart + +> **NOTE** +> [Backup](#FAQ) your previous configuration (if any exists) + +Neovim's configurations are located under the following paths, depending on your OS: + +| OS | PATH | +| :- | :--- | +| Linux, MacOS | `$XDG_CONFIG_HOME/nvim`, `~/.config/nvim` | +| Windows (cmd)| `%localappdata%\nvim\` | +| Windows (powershell)| `$env:LOCALAPPDATA\nvim\` | + +#### Recommended Step + +[Fork](https://docs.github.com/en/get-started/quickstart/fork-a-repo) this repo +so that you have your own copy that you can modify, then install by cloning the +fork to your machine using one of the commands below, depending on your OS. + +> **NOTE** +> Your fork's url will be something like this: +> `https://github.com//kickstart.nvim.git` + +You likely want to remove `lazy-lock.json` from your fork's `.gitignore` file +too - it's ignored in the kickstart repo to make maintenance easier, but it's +[recommmended to track it in version control](https://lazy.folke.io/usage/lockfile). + +#### Clone kickstart.nvim +> **NOTE** +> If following the recommended step above (i.e., forking the repo), replace +> `nvim-lua` with `` in the commands below + +
Linux and Mac + +```sh +git clone https://github.com/nvim-lua/kickstart.nvim.git "${XDG_CONFIG_HOME:-$HOME/.config}"/nvim +``` + +
+ +
Windows + +If you're using `cmd.exe`: + +``` +git clone https://github.com/nvim-lua/kickstart.nvim.git "%localappdata%\nvim" +``` + +If you're using `powershell.exe` + +``` +git clone https://github.com/nvim-lua/kickstart.nvim.git "${env:LOCALAPPDATA}\nvim" +``` + +
+ +### Post Installation + +Start Neovim + +```sh +nvim +``` + +That's it! Lazy will install all the plugins you have. Use `:Lazy` to view +current plugin status. Hit `q` to close the window. + +Read through the `init.lua` file in your configuration folder for more +information about extending and exploring Neovim. That also includes +examples of adding popularly requested plugins. + + +### Getting Started + +[The Only Video You Need to Get Started with Neovim](https://youtu.be/m8C0Cq9Uv9o) + +### FAQ + +* What should I do if I already have a pre-existing neovim configuration? + * You should back it up and then delete all associated files. + * This includes your existing init.lua and the neovim files in `~/.local` + which can be deleted with `rm -rf ~/.local/share/nvim/` +* Can I keep my existing configuration in parallel to kickstart? + * Yes! You can use [NVIM_APPNAME](https://neovim.io/doc/user/starting.html#%24NVIM_APPNAME)`=nvim-NAME` + to maintain multiple configurations. For example, you can install the kickstart + configuration in `~/.config/nvim-kickstart` and create an alias: + ``` + alias nvim-kickstart='NVIM_APPNAME="nvim-kickstart" nvim' + ``` + When you run Neovim using `nvim-kickstart` alias it will use the alternative + config directory and the matching local directory + `~/.local/share/nvim-kickstart`. You can apply this approach to any Neovim + distribution that you would like to try out. +* What if I want to "uninstall" this configuration: + * See [lazy.nvim uninstall](https://lazy.folke.io/usage#-uninstalling) information +* Why is the kickstart `init.lua` a single file? Wouldn't it make sense to split it into multiple files? + * The main purpose of kickstart is to serve as a teaching tool and a reference + configuration that someone can easily use to `git clone` as a basis for their own. + As you progress in learning Neovim and Lua, you might consider splitting `init.lua` + into smaller parts. A fork of kickstart that does this while maintaining the + same functionality is available here: + * [kickstart-modular.nvim](https://github.com/dam9000/kickstart-modular.nvim) + * Discussions on this topic can be found here: + * [Restructure the configuration](https://github.com/nvim-lua/kickstart.nvim/issues/218) + * [Reorganize init.lua into a multi-file setup](https://github.com/nvim-lua/kickstart.nvim/pull/473) + +### Install Recipes + +Below you can find OS specific install instructions for Neovim and dependencies. + +After installing all the dependencies continue with the [Install Kickstart](#Install-Kickstart) step. + +#### Windows Installation + +
Windows with Microsoft C++ Build Tools and CMake +Installation may require installing build tools and updating the run command for `telescope-fzf-native` + +See `telescope-fzf-native` documentation for [more details](https://github.com/nvim-telescope/telescope-fzf-native.nvim#installation) + +This requires: + +- Install CMake and the Microsoft C++ Build Tools on Windows + +```lua +{'nvim-telescope/telescope-fzf-native.nvim', build = 'cmake -S. -Bbuild -DCMAKE_BUILD_TYPE=Release && cmake --build build --config Release && cmake --install build --prefix build' } +``` +
+
Windows with gcc/make using chocolatey +Alternatively, one can install gcc and make which don't require changing the config, +the easiest way is to use choco: + +1. install [chocolatey](https://chocolatey.org/install) +either follow the instructions on the page or use winget, +run in cmd as **admin**: +``` +winget install --accept-source-agreements chocolatey.chocolatey +``` + +2. install all requirements using choco, exit previous cmd and +open a new one so that choco path is set, and run in cmd as **admin**: +``` +choco install -y neovim git ripgrep wget fd unzip gzip mingw make +``` +
+
WSL (Windows Subsystem for Linux) + +``` +wsl --install +wsl +sudo add-apt-repository ppa:neovim-ppa/unstable -y +sudo apt update +sudo apt install make gcc ripgrep unzip git xclip neovim +``` +
+ +#### Linux Install +
Ubuntu Install Steps + +``` +sudo add-apt-repository ppa:neovim-ppa/unstable -y +sudo apt update +sudo apt install make gcc ripgrep unzip git xclip neovim +``` +
+
Debian Install Steps + +``` +sudo apt update +sudo apt install make gcc ripgrep unzip git xclip curl + +# Now we install nvim +curl -LO https://github.com/neovim/neovim/releases/latest/download/nvim-linux64.tar.gz +sudo rm -rf /opt/nvim-linux64 +sudo mkdir -p /opt/nvim-linux64 +sudo chmod a+rX /opt/nvim-linux64 +sudo tar -C /opt -xzf nvim-linux64.tar.gz + +# make it available in /usr/local/bin, distro installs to /usr/bin +sudo ln -sf /opt/nvim-linux64/bin/nvim /usr/local/bin/ +``` +
+
Fedora Install Steps + +``` +sudo dnf install -y gcc make git ripgrep fd-find unzip neovim +``` +
+ +
Arch Install Steps + +``` +sudo pacman -S --noconfirm --needed gcc make git ripgrep fd unzip neovim +``` +
+ diff --git a/.config/nvim/init.lua b/.config/nvim/init.lua new file mode 100644 index 0000000..f900f84 --- /dev/null +++ b/.config/nvim/init.lua @@ -0,0 +1,467 @@ +-- Set as the leader key +-- See `:help mapleader` +-- Must happen before plugins are loaded (otherwise wrong leader will be used) +vim.g.mapleader = ' ' +vim.g.maplocalleader = ' ' + +-- Set to true if you have a Nerd Font installed and selected in the terminal +vim.g.have_nerd_font = true + +-- [[ Setting options ]] +-- See `:help vim.opt` + +-- Make line numbers default +vim.opt.number = true +-- You can also add relative line numbers, to help with jumping. +-- Experiment for yourself to see if you like it! +-- vim.opt.relativenumber = true + +-- Enable mouse mode, can be useful for resizing splits for example! +vim.opt.mouse = 'a' + +-- Don't show the mode, since it's already in the status line +vim.opt.showmode = false + +-- Sync clipboard between OS and Neovim. +-- Schedule the setting after `UiEnter` because it can increase startup-time. +-- Remove this option if you want your OS clipboard to remain independent. +-- See `:help 'clipboard'` +vim.schedule(function() + vim.opt.clipboard = 'unnamedplus' +end) + +-- Enable break indent +vim.opt.breakindent = true + +-- Save undo history +vim.opt.undofile = true + +-- Case-insensitive searching UNLESS \C or one or more capital letters in the search term +vim.opt.ignorecase = true +vim.opt.smartcase = true + +-- Keep signcolumn on by default +vim.opt.signcolumn = 'yes' + +-- Decrease update time +vim.opt.updatetime = 250 + +-- Decrease mapped sequence wait time +-- Displays which-key popup sooner +vim.opt.timeoutlen = 300 + +-- Configure how new splits should be opened +vim.opt.splitright = true +vim.opt.splitbelow = true + +-- Sets how neovim will display certain whitespace characters in the editor. +-- See `:help 'list'` +-- and `:help 'listchars'` +vim.opt.list = true +vim.opt.listchars = { tab = '» ', trail = '·', nbsp = '␣' } + +-- Preview substitutions live, as you type! +vim.opt.inccommand = 'split' + +-- Show which line your cursor is on +vim.opt.cursorline = true + +-- Minimal number of screen lines to keep above and below the cursor. +vim.opt.scrolloff = 10 + +-- [[ Basic Keymaps ]] +-- See `:help vim.keymap.set()` + +-- Clear highlights on search when pressing in normal mode +-- See `:help hlsearch` +vim.keymap.set('n', '', 'nohlsearch') + +-- Diagnostic keymaps +vim.keymap.set('n', 'q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' }) + +-- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier +-- for people to discover. Otherwise, you normally need to press , which +-- is not what someone will guess without a bit more experience. +-- +-- NOTE: This won't work in all terminal emulators/tmux/etc. Try your own mapping +-- or just use to exit terminal mode +vim.keymap.set('t', '', '', { desc = 'Exit terminal mode' }) + +-- TIP: Disable arrow keys in normal mode +-- vim.keymap.set('n', '', 'echo "Use h to move!!"') +-- vim.keymap.set('n', '', 'echo "Use l to move!!"') +-- vim.keymap.set('n', '', 'echo "Use k to move!!"') +-- vim.keymap.set('n', '', 'echo "Use j to move!!"') + +-- Keybinds to make split navigation easier. +-- Use CTRL+ to switch between windows +-- +-- See `:help wincmd` for a list of all window commands +vim.keymap.set('n', '', '', { desc = 'Move focus to the left window' }) +vim.keymap.set('n', '', '', { desc = 'Move focus to the right window' }) +vim.keymap.set('n', '', '', { desc = 'Move focus to the lower window' }) +vim.keymap.set('n', '', '', { desc = 'Move focus to the upper window' }) + +-- Turn on/off word wrapping +vim.keymap.set('n', '', 'set wrap!', { desc = 'Toggle word wrap' }) + +-- [[ Basic Autocommands ]] +-- See `:help lua-guide-autocommands + +-- Highlight when yanking (copying) text +-- Try it with `yap` in normal mode +-- See `:help vim.highlight.on_yank()` +vim.api.nvim_create_autocmd('TextYankPost', { + desc = 'Highlight when yanking (copying) text', + group = vim.api.nvim_create_augroup('kickstart-highlight-yank', { clear = true }), + callback = function() + vim.highlight.on_yank() + end, +}) + +-- [[ Install `lazy.nvim` plugin manager ]] +-- See `:help lazy.nvim.txt` or https://github.com/folke/lazy.nvim for more info +local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim' +if not (vim.uv or vim.loop).fs_stat(lazypath) then + local lazyrepo = 'https://github.com/folke/lazy.nvim.git' + local out = vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath } + if vim.v.shell_error ~= 0 then + error('Error cloning lazy.nvim:\n' .. out) + end +end ---@diagnostic disable-next-line: undefined-field +vim.opt.rtp:prepend(lazypath) + +-- [[ Configure and install plugins ]] +-- +-- To check the current status of your plugins, run +-- :Lazy +-- +-- You can press `?` in this menu for help. Use `:q` to close the window +-- +-- To update plugins you can run +-- :Lazy update +-- +-- NOTE: Here is where you install your plugins. +require('lazy').setup({ + 'tpope/vim-sleuth', -- Detect tabstop and shiftwidth automatically + + { -- Useful plugin to show you pending keybinds. + 'folke/which-key.nvim', + event = 'VimEnter', -- Sets the loading event to 'VimEnter' + opts = { + icons = { + -- set icon mappings to true if you have a Nerd Font + mappings = vim.g.have_nerd_font, + -- If you are using a Nerd Font: set icons.keys to an empty table which will use the + -- default whick-key.nvim defined Nerd Font icons, otherwise define a string table + keys = vim.g.have_nerd_font and {} or { + Up = ' ', + Down = ' ', + Left = ' ', + Right = ' ', + C = ' ', + M = ' ', + D = ' ', + S = ' ', + CR = ' ', + Esc = ' ', + ScrollWheelDown = ' ', + ScrollWheelUp = ' ', + NL = ' ', + BS = ' ', + Space = ' ', + Tab = ' ', + F1 = '', + F2 = '', + F3 = '', + F4 = '', + F5 = '', + F6 = '', + F7 = '', + F8 = '', + F9 = '', + F10 = '', + F11 = '', + F12 = '', + }, + }, + + -- Document existing key chains + spec = { + { 'c', group = '[C]ode', mode = { 'n', 'x' } }, + { 'd', group = '[D]ocument' }, + { 'r', group = '[R]ename' }, + { 's', group = '[S]earch' }, + { 'w', group = '[W]orkspace' }, + { 't', group = '[T]oggle' }, + { 'h', group = 'Git [H]unk', mode = { 'n', 'v' } }, + }, + }, + }, + + -- NOTE: Plugins can specify dependencies. + -- + -- The dependencies are proper plugin specifications as well - anything + -- you do for a plugin at the top level, you can do for a dependency. + -- + -- Use the `dependencies` key to specify the dependencies of a particular plugin + + { -- Fuzzy Finder (files, lsp, etc) + 'nvim-telescope/telescope.nvim', + event = 'VimEnter', + branch = '0.1.x', + dependencies = { + 'nvim-lua/plenary.nvim', + { -- If encountering errors, see telescope-fzf-native README for installation instructions + 'nvim-telescope/telescope-fzf-native.nvim', + + -- `build` is used to run some command when the plugin is installed/updated. + -- This is only run then, not every time Neovim starts up. + build = 'make', + + -- `cond` is a condition used to determine whether this plugin should be + -- installed and loaded. + cond = function() + return vim.fn.executable 'make' == 1 + end, + }, + { 'nvim-telescope/telescope-ui-select.nvim' }, + + -- Useful for getting pretty icons, but requires a Nerd Font. + -- { 'nvim-tree/nvim-web-devicons', enabled = vim.g.have_nerd_font }, + }, + config = function() + -- Telescope is a fuzzy finder that comes with a lot of different things that + -- it can fuzzy find! It's more than just a "file finder", it can search + -- many different aspects of Neovim, your workspace, LSP, and more! + -- + -- The easiest way to use Telescope, is to start by doing something like: + -- :Telescope help_tags + -- + -- After running this command, a window will open up and you're able to + -- type in the prompt window. You'll see a list of `help_tags` options and + -- a corresponding preview of the help. + -- + -- Two important keymaps to use while in Telescope are: + -- - Insert mode: + -- - Normal mode: ? + -- + -- This opens a window that shows you all of the keymaps for the current + -- Telescope picker. This is really useful to discover what Telescope can + -- do as well as how to actually do it! + + -- [[ Configure Telescope ]] + -- See `:help telescope` and `:help telescope.setup()` + require('telescope').setup { + -- You can put your default mappings / updates / etc. in here + -- All the info you're looking for is in `:help telescope.setup()` + -- + -- defaults = { + -- mappings = { + -- i = { [''] = 'to_fuzzy_refine' }, + -- }, + -- }, + -- pickers = {} + extensions = { + ['ui-select'] = { + require('telescope.themes').get_dropdown(), + }, + }, + } + + -- Enable Telescope extensions if they are installed + pcall(require('telescope').load_extension, 'fzf') + pcall(require('telescope').load_extension, 'ui-select') + + -- See `:help telescope.builtin` + local builtin = require 'telescope.builtin' + vim.keymap.set('n', 'sh', builtin.help_tags, { desc = '[S]earch [H]elp' }) + vim.keymap.set('n', 'sk', builtin.keymaps, { desc = '[S]earch [K]eymaps' }) + -- TODO: Make this work when there isn't a git repo + -- https://github.com/LunarVim/LunarVim/pull/2089 + vim.keymap.set('n', 'sf', 'Telescope git_files show_untracked=true', { desc = '[S]earch [F]iles' }) + vim.keymap.set('n', 'sa', 'Telescope find_files no_ignore=true hidden=true', { desc = '[S]earch [A]ll files' }) + vim.keymap.set('n', 'ss', builtin.builtin, { desc = '[S]earch [S]elect Telescope' }) + vim.keymap.set('n', 'sw', builtin.grep_string, { desc = '[S]earch current [W]ord' }) + vim.keymap.set('n', 'sg', builtin.live_grep, { desc = '[S]earch by [G]rep' }) + vim.keymap.set('n', 'sd', builtin.diagnostics, { desc = '[S]earch [D]iagnostics' }) + vim.keymap.set('n', 'sr', builtin.resume, { desc = '[S]earch [R]esume' }) + vim.keymap.set('n', 's.', builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' }) + vim.keymap.set('n', '', builtin.buffers, { desc = '[ ] Find existing buffers' }) + + -- Slightly advanced example of overriding default behavior and theme + vim.keymap.set('n', '/', function() + -- You can pass additional configuration to Telescope to change the theme, layout, etc. + builtin.current_buffer_fuzzy_find(require('telescope.themes').get_dropdown { + winblend = 10, + previewer = false, + }) + end, { desc = '[/] Fuzzily search in current buffer' }) + + -- It's also possible to pass additional configuration options. + -- See `:help telescope.builtin.live_grep()` for information about particular keys + vim.keymap.set('n', 's/', function() + builtin.live_grep { + grep_open_files = true, + prompt_title = 'Live Grep in Open Files', + } + end, { desc = '[S]earch [/] in Open Files' }) + + -- Shortcut for searching your Neovim configuration files + vim.keymap.set('n', 'sn', function() + builtin.find_files { cwd = vim.fn.stdpath 'config' } + end, { desc = '[S]earch [N]eovim files' }) + end, + }, + + -- LSP Plugins + { + -- `lazydev` configures Lua LSP for your Neovim config, runtime and plugins + -- used for completion, annotations and signatures of Neovim apis + 'folke/lazydev.nvim', + ft = 'lua', + opts = { + library = { + -- Load luvit types when the `vim.uv` word is found + { path = 'luvit-meta/library', words = { 'vim%.uv' } }, + }, + }, + }, + { 'Bilal2453/luvit-meta', lazy = true }, + + { -- Autoformat + 'stevearc/conform.nvim', + event = { 'BufWritePre' }, + cmd = { 'ConformInfo' }, + keys = { + { + 'f', + function() + require('conform').format { async = true, lsp_format = 'fallback' } + end, + mode = '', + desc = '[F]ormat buffer', + }, + }, + opts = { + notify_on_error = false, + format_on_save = function(bufnr) + -- Disable "format_on_save lsp_fallback" for languages that don't + -- have a well standardized coding style. You can add additional + -- languages here or re-enable it for the disabled ones. + local disable_filetypes = { c = true, cpp = true } + local lsp_format_opt + if disable_filetypes[vim.bo[bufnr].filetype] then + lsp_format_opt = 'never' + else + lsp_format_opt = 'fallback' + end + return { + timeout_ms = 500, + lsp_format = lsp_format_opt, + } + end, + formatters_by_ft = { + lua = { 'stylua' }, + -- Conform can also run multiple formatters sequentially + -- python = { "isort", "black" }, + -- + -- You can use 'stop_after_first' to run the first available formatter from the list + -- javascript = { "prettierd", "prettier", stop_after_first = true }, + }, + }, + }, + + { -- Collection of various small independent plugins/modules + 'echasnovski/mini.nvim', + config = function() + -- Better Around/Inside textobjects + -- + -- Examples: + -- - va) - [V]isually select [A]round [)]paren + -- - yinq - [Y]ank [I]nside [N]ext [Q]uote + -- - ci' - [C]hange [I]nside [']quote + require('mini.ai').setup { n_lines = 500 } + + -- Add/delete/replace surroundings (brackets, quotes, etc.) + -- + -- - saiw) - [S]urround [A]dd [I]nner [W]ord [)]Paren + -- - sd' - [S]urround [D]elete [']quotes + -- - sr)' - [S]urround [R]eplace [)] ['] + require('mini.surround').setup() + + -- Simple and easy statusline. + -- You could remove this setup call if you don't like it, + -- and try some other statusline plugin + local statusline = require 'mini.statusline' + -- set use_icons to true if you have a Nerd Font + statusline.setup { use_icons = vim.g.have_nerd_font } + + -- You can configure sections in the statusline by overriding their + -- default behavior. For example, here we set the section for + -- cursor location to LINE:COLUMN + ---@diagnostic disable-next-line: duplicate-set-field + statusline.section_location = function() + return '%2l:%-2v' + end + + -- ... and there is more! + -- Check out: https://github.com/echasnovski/mini.nvim + end, + }, + { -- Highlight, edit, and navigate code + 'nvim-treesitter/nvim-treesitter', + build = ':TSUpdate', + main = 'nvim-treesitter.configs', -- Sets main module to use for opts + -- [[ Configure Treesitter ]] See `:help nvim-treesitter` + opts = { + ensure_installed = { 'bash', 'c', 'diff', 'html', 'lua', 'luadoc', 'markdown', 'markdown_inline', 'query', 'vim', 'vimdoc', 'cpp', 'python', 'rust' }, + -- Autoinstall languages that are not installed + auto_install = true, + highlight = { + enable = true, + -- Some languages depend on vim's regex highlighting system (such as Ruby) for indent rules. + -- If you are experiencing weird indenting issues, add the language to + -- the list of additional_vim_regex_highlighting and disabled languages for indent. + additional_vim_regex_highlighting = { 'ruby' }, + }, + indent = { enable = true, disable = { 'ruby' } }, + }, + -- There are additional nvim-treesitter modules that you can use to interact + -- with nvim-treesitter. You should go explore a few and see what interests you: + -- + -- - Incremental selection: Included, see `:help nvim-treesitter-incremental-selection-mod` + -- - Show your current context: https://github.com/nvim-treesitter/nvim-treesitter-context + -- - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects + }, + { + 'nvim-treesitter/nvim-treesitter-context', + opts = { + multiline_threshold = 5, + }, + }, + { import = 'plugins' }, +}, { + ui = { + -- If you are using a Nerd Font: set icons to an empty table which will use the + -- default lazy.nvim defined Nerd Font icons, otherwise define a unicode icons table + icons = vim.g.have_nerd_font and {} or { + cmd = '⌘', + config = '🛠', + event = '📅', + ft = '📂', + init = '⚙', + keys = '🗝', + plugin = '🔌', + runtime = '💻', + require = '🌙', + source = '📄', + start = '🚀', + task = '📌', + lazy = '💤 ', + }, + }, +}) + +-- The line beneath this is called `modeline`. See `:help modeline` +-- vim: ts=2 sts=2 sw=2 et diff --git a/.config/nvim/lazy-lock.json b/.config/nvim/lazy-lock.json new file mode 100644 index 0000000..987c03e --- /dev/null +++ b/.config/nvim/lazy-lock.json @@ -0,0 +1,39 @@ +{ + "LuaSnip": { "branch": "master", "commit": "8d7aa7a7b7c0875e4878d1d2590924bc1c229305" }, + "cmp-nvim-lsp": { "branch": "main", "commit": "39e2eda76828d88b773cc27a3f61d2ad782c922d" }, + "cmp-path": { "branch": "main", "commit": "91ff86cd9c29299a64f968ebb45846c485725f23" }, + "cmp_luasnip": { "branch": "master", "commit": "05a9ab28b53f71d1aece421ef32fee2cb857a843" }, + "conform.nvim": { "branch": "master", "commit": "6a28c90082a67f62a323ab90d988e000a718a8c7" }, + "fidget.nvim": { "branch": "main", "commit": "e2a175c2abe2d4f65357da1c98c59a5cfb2b543f" }, + "gitsigns.nvim": { "branch": "main", "commit": "7c27a30450130cd59c4994a6755e3c5d74d83e76" }, + "indent-blankline.nvim": { "branch": "master", "commit": "04e44b09ee3ff189c69ab082edac1ef7ae2e256c" }, + "lazy.nvim": { "branch": "main", "commit": "cf8ecc2c5e4332760431a33534240b0cbc6680ab" }, + "lazydev.nvim": { "branch": "main", "commit": "491452cf1ca6f029e90ad0d0368848fac717c6d2" }, + "lazygit.nvim": { "branch": "main", "commit": "56760339a81cd1540d5a72fd9d93010a2677b55d" }, + "luvit-meta": { "branch": "main", "commit": "ce76f6f6cdc9201523a5875a4471dcfe0186eb60" }, + "mason-lspconfig.nvim": { "branch": "main", "commit": "4d0e5b49363cac187326998b96aa6a2884e0e89b" }, + "mason-tool-installer.nvim": { "branch": "main", "commit": "c5e07b8ff54187716334d585db34282e46fa2932" }, + "mason.nvim": { "branch": "main", "commit": "e2f7f9044ec30067bc11800a9e266664b88cda22" }, + "mini.nvim": { "branch": "main", "commit": "0a8a1072137d916406507c941698a4bfa9dbbe7a" }, + "neo-tree.nvim": { "branch": "main", "commit": "a77af2e764c5ed4038d27d1c463fa49cd4794e07" }, + "nui.nvim": { "branch": "main", "commit": "b58e2bfda5cea347c9d58b7f11cf3012c7b3953f" }, + "nvim-autopairs": { "branch": "master", "commit": "ee297f215e95a60b01fde33275cc3c820eddeebe" }, + "nvim-cmp": { "branch": "main", "commit": "29fb4854573355792df9e156cb779f0d31308796" }, + "nvim-lint": { "branch": "master", "commit": "16b21a7d04d06661f92f273a0744fd81fb19e09e" }, + "nvim-lspconfig": { "branch": "master", "commit": "59a6766cbf32c7e4cf3ed685ccad7ffe1dde8c40" }, + "nvim-treesitter": { "branch": "master", "commit": "1c111e3e8f42c85b16cb4bf30e4254fcb5607817" }, + "nvim-treesitter-context": { "branch": "master", "commit": "a2a334900d3643de585ac5c6140b03403454124f" }, + "nvim-ufo": { "branch": "main", "commit": "522d719d421fc42b95577d9624048d8348d326ea" }, + "nvim-web-devicons": { "branch": "master", "commit": "19d257cf889f79f4022163c3fbb5e08639077bd8" }, + "onedark.nvim": { "branch": "master", "commit": "fae34f7c635797f4bf62fb00e7d0516efa8abe37" }, + "plenary.nvim": { "branch": "master", "commit": "2d9b06177a975543726ce5c73fca176cedbffe9d" }, + "promise-async": { "branch": "main", "commit": "119e8961014c9bfaf1487bf3c2a393d254f337e2" }, + "rainbow-delimiters.nvim": { "branch": "master", "commit": "d227e6c9879bb50af35cd733461198666981d482" }, + "telescope-fzf-native.nvim": { "branch": "main", "commit": "cf48d4dfce44e0b9a2e19a008d6ec6ea6f01a83b" }, + "telescope-ui-select.nvim": { "branch": "master", "commit": "6e51d7da30bd139a6950adf2a47fda6df9fa06d2" }, + "telescope.nvim": { "branch": "0.1.x", "commit": "a0bbec21143c7bc5f8bb02e0005fa0b982edc026" }, + "todo-comments.nvim": { "branch": "main", "commit": "ae0a2afb47cf7395dc400e5dc4e05274bf4fb9e0" }, + "vim-sleuth": { "branch": "master", "commit": "be69bff86754b1aa5adcbb527d7fcd1635a84080" }, + "vim-tmux-navigator": { "branch": "master", "commit": "a9b52e7d36114d40350099f254b5f299a35df978" }, + "which-key.nvim": { "branch": "main", "commit": "8badb359f7ab8711e2575ef75dfe6fbbd87e4821" } +} diff --git a/.config/nvim/lua/kickstart/health.lua b/.config/nvim/lua/kickstart/health.lua new file mode 100644 index 0000000..b59d086 --- /dev/null +++ b/.config/nvim/lua/kickstart/health.lua @@ -0,0 +1,52 @@ +--[[ +-- +-- This file is not required for your own configuration, +-- but helps people determine if their system is setup correctly. +-- +--]] + +local check_version = function() + local verstr = tostring(vim.version()) + if not vim.version.ge then + vim.health.error(string.format("Neovim out of date: '%s'. Upgrade to latest stable or nightly", verstr)) + return + end + + if vim.version.ge(vim.version(), '0.10-dev') then + vim.health.ok(string.format("Neovim version is: '%s'", verstr)) + else + vim.health.error(string.format("Neovim out of date: '%s'. Upgrade to latest stable or nightly", verstr)) + end +end + +local check_external_reqs = function() + -- Basic utils: `git`, `make`, `unzip` + for _, exe in ipairs { 'git', 'make', 'unzip', 'rg' } do + local is_executable = vim.fn.executable(exe) == 1 + if is_executable then + vim.health.ok(string.format("Found executable: '%s'", exe)) + else + vim.health.warn(string.format("Could not find executable: '%s'", exe)) + end + end + + return true +end + +return { + check = function() + vim.health.start 'kickstart.nvim' + + vim.health.info [[NOTE: Not every warning is a 'must-fix' in `:checkhealth` + + Fix only warnings for plugins and languages you intend to use. + Mason will give warnings for languages that are not installed. + You do not need to install, unless you want to use those languages!]] + + local uv = vim.uv or vim.loop + vim.health.info('System Information: ' .. vim.inspect(uv.os_uname())) + + check_version() + check_external_reqs() + end, +} diff --git a/.config/nvim/lua/plugins/autopairs.lua b/.config/nvim/lua/plugins/autopairs.lua new file mode 100644 index 0000000..87a7e5f --- /dev/null +++ b/.config/nvim/lua/plugins/autopairs.lua @@ -0,0 +1,16 @@ +-- autopairs +-- https://github.com/windwp/nvim-autopairs + +return { + 'windwp/nvim-autopairs', + event = 'InsertEnter', + -- Optional dependency + dependencies = { 'hrsh7th/nvim-cmp' }, + config = function() + require('nvim-autopairs').setup {} + -- If you want to automatically add `(` after selecting a function or method + local cmp_autopairs = require 'nvim-autopairs.completion.cmp' + local cmp = require 'cmp' + cmp.event:on('confirm_done', cmp_autopairs.on_confirm_done()) + end, +} diff --git a/.config/nvim/lua/plugins/debug.lua b/.config/nvim/lua/plugins/debug.lua new file mode 100644 index 0000000..f1170d2 --- /dev/null +++ b/.config/nvim/lua/plugins/debug.lua @@ -0,0 +1,105 @@ +-- debug.lua +-- +-- Shows how to use the DAP plugin to debug your code. +-- +-- Primarily focused on configuring the debugger for Go, but can +-- be extended to other languages as well. That's why it's called +-- kickstart.nvim and not kitchen-sink.nvim ;) + +return { + -- -- NOTE: Yes, you can install new plugins here! + -- 'mfussenegger/nvim-dap', + -- -- NOTE: And you can specify dependencies as well + -- dependencies = { + -- -- Creates a beautiful debugger UI + -- 'rcarriga/nvim-dap-ui', + + -- -- Required dependency for nvim-dap-ui + -- 'nvim-neotest/nvim-nio', + + -- -- Installs the debug adapters for you + -- 'williamboman/mason.nvim', + -- 'jay-babu/mason-nvim-dap.nvim', + + -- -- Add your own debuggers here + -- 'leoluz/nvim-dap-go', + -- }, + -- keys = function(_, keys) + -- local dap = require 'dap' + -- local dapui = require 'dapui' + -- return { + -- -- Basic debugging keymaps, feel free to change to your liking! + -- { '', dap.continue, desc = 'Debug: Start/Continue' }, + -- { '', dap.step_into, desc = 'Debug: Step Into' }, + -- { '', dap.step_over, desc = 'Debug: Step Over' }, + -- { '', dap.step_out, desc = 'Debug: Step Out' }, + -- { 'b', dap.toggle_breakpoint, desc = 'Debug: Toggle Breakpoint' }, + -- { + -- 'B', + -- function() + -- dap.set_breakpoint(vim.fn.input 'Breakpoint condition: ') + -- end, + -- desc = 'Debug: Set Breakpoint', + -- }, + -- -- Toggle to see last session result. Without this, you can't see session output in case of unhandled exception. + -- { '', dapui.toggle, desc = 'Debug: See last session result.' }, + -- unpack(keys), + -- } + -- end, + -- config = function() + -- local dap = require 'dap' + -- local dapui = require 'dapui' + + -- require('mason-nvim-dap').setup { + -- -- Makes a best effort to setup the various debuggers with + -- -- reasonable debug configurations + -- automatic_installation = true, + + -- -- You can provide additional configuration to the handlers, + -- -- see mason-nvim-dap README for more information + -- handlers = {}, + + -- -- You'll need to check that you have the required things installed + -- -- online, please don't ask me how to install them :) + -- ensure_installed = { + -- -- Update this to ensure that you have the debuggers for the langs you want + -- 'delve', + -- }, + -- } + + -- -- Dap UI setup + -- -- For more information, see |:help nvim-dap-ui| + -- dapui.setup { + -- -- Set icons to characters that are more likely to work in every terminal. + -- -- Feel free to remove or use ones that you like more! :) + -- -- Don't feel like these are good choices. + -- icons = { expanded = '▾', collapsed = '▸', current_frame = '*' }, + -- controls = { + -- icons = { + -- pause = '⏸', + -- play = '▶', + -- step_into = '⏎', + -- step_over = '⏭', + -- step_out = '⏮', + -- step_back = 'b', + -- run_last = '▶▶', + -- terminate = '⏹', + -- disconnect = '⏏', + -- }, + -- }, + -- } + + -- dap.listeners.after.event_initialized['dapui_config'] = dapui.open + -- dap.listeners.before.event_terminated['dapui_config'] = dapui.close + -- dap.listeners.before.event_exited['dapui_config'] = dapui.close + + -- -- Install golang specific config + -- require('dap-go').setup { + -- delve = { + -- -- On Windows delve must be run attached or it crashes. + -- -- See https://github.com/leoluz/nvim-dap-go/blob/main/README.md#configuring + -- detached = vim.fn.has 'win32' == 0, + -- }, + -- } + -- end, +} diff --git a/.config/nvim/lua/plugins/fold.lua b/.config/nvim/lua/plugins/fold.lua new file mode 100644 index 0000000..68dd392 --- /dev/null +++ b/.config/nvim/lua/plugins/fold.lua @@ -0,0 +1,106 @@ +return { -- use LSP as folding provider + -- Stolen from + -- https://github.com/chrisgrieser/.config/blob/73ae471f7278089fdc2925194eda4fd1067b316d/nvim/lua/plugins/folding.lua#L8 + 'kevinhwang91/nvim-ufo', + dependencies = 'kevinhwang91/promise-async', + event = 'UIEnter', -- needed for folds to load in time and comments being closed + keys = { + { 'z?', vim.cmd.UfoInspect, desc = '󱃄 :UfoInspect' }, + { + 'zm', + function() + require('ufo').closeAllFolds() + end, + desc = '󱃄 Close All Folds', + }, + { + 'zr', + function() + require('ufo').openFoldsExceptKinds { 'comment', 'imports' } + end, + desc = '󱃄 Open Regular Folds', + }, + { + 'z1', + function() + require('ufo').closeFoldsWith(1) + end, + desc = '󱃄 Close L1 Folds', + }, + { + 'z2', + function() + require('ufo').closeFoldsWith(2) + end, + desc = '󱃄 Close L2 Folds', + }, + { + 'z3', + function() + require('ufo').closeFoldsWith(3) + end, + desc = '󱃄 Close L3 Folds', + }, + }, + init = function() + -- INFO fold commands usually change the foldlevel, which fixes folds, e.g. + -- auto-closing them after leaving insert mode, however ufo does not seem to + -- have equivalents for zr and zm because there is no saved fold level. + -- Consequently, the vim-internal fold levels need to be disabled by setting + -- them to 99. + vim.opt.foldlevel = 99 + vim.opt.foldlevelstart = 99 + end, + opts = { + -- when opening the buffer, close these fold kinds + -- close_fold_kinds_for_ft = { + -- default = { 'imports', 'comment' }, + -- json = { 'array' }, + -- -- use `:UfoInspect` to get see available fold kinds + -- }, + open_fold_hl_timeout = 800, + -- provider_selector = function(_, ft, buftype) + -- -- PERF disable folds on `log`, and only use `indent` for `bib` files + -- if ft == 'log' then + -- return '' + -- end + -- if ft == 'bib' then + -- return 'indent' + -- end + -- -- ufo accepts only two kinds as priority, see https://github.com/kevinhwang91/nvim-ufo/issues/256 + -- if buftype ~= '' or vim.startswith(ft, 'git') or ft == '' then + -- return 'indent' + -- end + -- return { 'lsp', 'treesitter' } + -- end, + -- show folds with number of folded lines instead of just the icon + -- fold_virt_text_handler = function(virtText, lnum, endLnum, width, truncate) + -- local hlgroup = 'NonText' + -- local icon = '' + -- local newVirtText = {} + -- local suffix = (' %s %d'):format(icon, endLnum - lnum) + -- local sufWidth = vim.fn.strdisplaywidth(suffix) + -- local targetWidth = width - sufWidth + -- local curWidth = 0 + -- for _, chunk in ipairs(virtText) do + -- local chunkText = chunk[1] + -- local chunkWidth = vim.fn.strdisplaywidth(chunkText) + -- if targetWidth > curWidth + chunkWidth then + -- table.insert(newVirtText, chunk) + -- else + -- chunkText = truncate(chunkText, targetWidth - curWidth) + -- local hlGroup = chunk[2] + -- table.insert(newVirtText, { chunkText, hlGroup }) + -- chunkWidth = vim.fn.strdisplaywidth(chunkText) + -- if curWidth + chunkWidth < targetWidth then + -- suffix = suffix .. (' '):rep(targetWidth - curWidth - chunkWidth) + -- end + -- break + -- end + -- curWidth = curWidth + chunkWidth + -- end + -- table.insert(newVirtText, { suffix, hlgroup }) + -- return newVirtText + -- end, + }, +} diff --git a/.config/nvim/lua/plugins/git.lua b/.config/nvim/lua/plugins/git.lua new file mode 100644 index 0000000..9efc46e --- /dev/null +++ b/.config/nvim/lua/plugins/git.lua @@ -0,0 +1,88 @@ +-- lazygit +-- https://github.com/kdheepak/lazygit.nvim + +return { + { + 'kdheepak/lazygit.nvim', + lazy = true, + cmd = { + 'LazyGit', + 'LazyGitConfig', + 'LazyGitCurrentFile', + 'LazyGitFilter', + 'LazyGitFilterCurrentFile', + }, + -- optional for floating window border decoration + dependencies = { + 'nvim-lua/plenary.nvim', + }, + -- setting the keybinding for LazyGit with 'keys' is recommended in + -- order to load the plugin when the command is run for the first time + keys = { + { 'lg', 'LazyGit', desc = 'LazyGit' }, + }, + }, + { + 'lewis6991/gitsigns.nvim', + opts = { + signs = { + add = { text = '+' }, + change = { text = '~' }, + delete = { text = '_' }, + topdelete = { text = '‾' }, + changedelete = { text = '~' }, + }, + on_attach = function(bufnr) + local gitsigns = require 'gitsigns' + + local function map(mode, l, r, opts) + opts = opts or {} + opts.buffer = bufnr + vim.keymap.set(mode, l, r, opts) + end + + -- Navigation + map('n', ']c', function() + if vim.wo.diff then + vim.cmd.normal { ']c', bang = true } + else + gitsigns.nav_hunk 'next' + end + end, { desc = 'Jump to next git [c]hange' }) + + map('n', '[c', function() + if vim.wo.diff then + vim.cmd.normal { '[c', bang = true } + else + gitsigns.nav_hunk 'prev' + end + end, { desc = 'Jump to previous git [c]hange' }) + + -- Actions + -- visual mode + map('v', 'hs', function() + gitsigns.stage_hunk { vim.fn.line '.', vim.fn.line 'v' } + end, { desc = 'stage git hunk' }) + map('v', 'hr', function() + gitsigns.reset_hunk { vim.fn.line '.', vim.fn.line 'v' } + end, { desc = 'reset git hunk' }) + -- normal mode + map('n', 'hs', gitsigns.stage_hunk, { desc = 'git [s]tage hunk' }) + map('n', 'hr', gitsigns.reset_hunk, { desc = 'git [r]eset hunk' }) + map('n', 'hS', gitsigns.stage_buffer, { desc = 'git [S]tage buffer' }) + map('n', 'hu', gitsigns.undo_stage_hunk, { desc = 'git [u]ndo stage hunk' }) + map('n', 'hR', gitsigns.reset_buffer, { desc = 'git [R]eset buffer' }) + map('n', 'hp', gitsigns.preview_hunk, { desc = 'git [p]review hunk' }) + map('n', 'hb', gitsigns.blame_line, { desc = 'git [b]lame line' }) + map('n', 'hd', gitsigns.diffthis, { desc = 'git [d]iff against index' }) + map('n', 'hD', function() + gitsigns.diffthis '@' + end, { desc = 'git [D]iff against last commit' }) + -- Toggles + map('n', 'tb', gitsigns.toggle_current_line_blame, { desc = '[T]oggle git show [b]lame line' }) + map('n', 'tD', gitsigns.toggle_deleted, { desc = '[T]oggle git show [D]eleted' }) + end, + }, + }, +} + diff --git a/.config/nvim/lua/plugins/lint.lua b/.config/nvim/lua/plugins/lint.lua new file mode 100644 index 0000000..ca9bc23 --- /dev/null +++ b/.config/nvim/lua/plugins/lint.lua @@ -0,0 +1,55 @@ +return { + + { -- Linting + 'mfussenegger/nvim-lint', + event = { 'BufReadPre', 'BufNewFile' }, + config = function() + local lint = require 'lint' + lint.linters_by_ft = { + markdown = { 'markdownlint' }, + } + + -- To allow other plugins to add linters to require('lint').linters_by_ft, + -- instead set linters_by_ft like this: + -- lint.linters_by_ft = lint.linters_by_ft or {} + -- lint.linters_by_ft['markdown'] = { 'markdownlint' } + -- + -- However, note that this will enable a set of default linters, + -- which will cause errors unless these tools are available: + -- { + -- clojure = { "clj-kondo" }, + -- dockerfile = { "hadolint" }, + -- inko = { "inko" }, + -- janet = { "janet" }, + -- json = { "jsonlint" }, + -- markdown = { "vale" }, + -- rst = { "vale" }, + -- ruby = { "ruby" }, + -- terraform = { "tflint" }, + -- text = { "vale" } + -- } + -- + -- You can disable the default linters by setting their filetypes to nil: + -- lint.linters_by_ft['clojure'] = nil + -- lint.linters_by_ft['dockerfile'] = nil + -- lint.linters_by_ft['inko'] = nil + -- lint.linters_by_ft['janet'] = nil + -- lint.linters_by_ft['json'] = nil + -- lint.linters_by_ft['markdown'] = nil + -- lint.linters_by_ft['rst'] = nil + -- lint.linters_by_ft['ruby'] = nil + -- lint.linters_by_ft['terraform'] = nil + -- lint.linters_by_ft['text'] = nil + + -- Create autocommand which carries out the actual linting + -- on the specified events. + local lint_augroup = vim.api.nvim_create_augroup('lint', { clear = true }) + vim.api.nvim_create_autocmd({ 'BufEnter', 'BufWritePost', 'InsertLeave' }, { + group = lint_augroup, + callback = function() + lint.try_lint() + end, + }) + end, + }, +} diff --git a/.config/nvim/lua/plugins/lsp.lua b/.config/nvim/lua/plugins/lsp.lua new file mode 100644 index 0000000..f9f634f --- /dev/null +++ b/.config/nvim/lua/plugins/lsp.lua @@ -0,0 +1,304 @@ +-- Add in all lsp config +return { + { + -- Main LSP Configuration + 'neovim/nvim-lspconfig', + dependencies = { + -- Automatically install LSPs and related tools to stdpath for Neovim + { 'williamboman/mason.nvim', config = true }, -- NOTE: Must be loaded before dependants + 'williamboman/mason-lspconfig.nvim', + 'WhoIsSethDaniel/mason-tool-installer.nvim', + + -- Useful status updates for LSP. + -- NOTE: `opts = {}` is the same as calling `require('fidget').setup({})` + { 'j-hui/fidget.nvim', opts = {} }, + + -- Allows extra capabilities provided by nvim-cmp + 'hrsh7th/cmp-nvim-lsp', + }, + -- Must of the config + config = function() + vim.api.nvim_create_autocmd('LspAttach', { + group = vim.api.nvim_create_augroup('kickstart-lsp-attach', { clear = true }), + callback = function(event) + -- NOTE: Remember that Lua is a real programming language, and as such it is possible + -- to define small helper and utility functions so you don't have to repeat yourself. + -- + -- In this case, we create a function that lets us more easily define mappings specific + -- for LSP related items. It sets the mode, buffer and description for us each time. + local map = function(keys, func, desc, mode) + mode = mode or 'n' + vim.keymap.set(mode, keys, func, { buffer = event.buf, desc = 'LSP: ' .. desc }) + end + + -- Jump to the definition of the word under your cursor. + -- This is where a variable was first declared, or where a function is defined, etc. + -- To jump back, press . + map('gd', require('telescope.builtin').lsp_definitions, '[G]oto [D]efinition') + + -- Find references for the word under your cursor. + map('gr', require('telescope.builtin').lsp_references, '[G]oto [R]eferences') + + -- Jump to the implementation of the word under your cursor. + -- Useful when your language has ways of declaring types without an actual implementation. + map('gI', require('telescope.builtin').lsp_implementations, '[G]oto [I]mplementation') + + -- Jump to the type of the word under your cursor. + -- Useful when you're not sure what type a variable is and you want to see + -- the definition of its *type*, not where it was *defined*. + map('D', require('telescope.builtin').lsp_type_definitions, 'Type [D]efinition') + + -- Fuzzy find all the symbols in your current document. + -- Symbols are things like variables, functions, types, etc. + map('ds', require('telescope.builtin').lsp_document_symbols, '[D]ocument [S]ymbols') + + -- Fuzzy find all the symbols in your current workspace. + -- Similar to document symbols, except searches over your entire project. + map('ws', require('telescope.builtin').lsp_dynamic_workspace_symbols, '[W]orkspace [S]ymbols') + + -- Rename the variable under your cursor. + -- Most Language Servers support renaming across files, etc. + map('rn', vim.lsp.buf.rename, '[R]e[n]ame') + + -- Execute a code action, usually your cursor needs to be on top of an error + -- or a suggestion from your LSP for this to activate. + map('ca', vim.lsp.buf.code_action, '[C]ode [A]ction', { 'n', 'x' }) + + -- WARN: This is not Goto Definition, this is Goto Declaration. + -- For example, in C this would take you to the header. + map('gD', vim.lsp.buf.declaration, '[G]oto [D]eclaration') + + -- The following two autocommands are used to highlight references of the + -- word under your cursor when your cursor rests there for a little while. + -- See `:help CursorHold` for information about when this is executed + -- + -- When you move your cursor, the highlights will be cleared (the second autocommand). + local client = vim.lsp.get_client_by_id(event.data.client_id) + if client and client.supports_method(vim.lsp.protocol.Methods.textDocument_documentHighlight) then + local highlight_augroup = vim.api.nvim_create_augroup('kickstart-lsp-highlight', { clear = false }) + vim.api.nvim_create_autocmd({ 'CursorHold', 'CursorHoldI' }, { + buffer = event.buf, + group = highlight_augroup, + callback = vim.lsp.buf.document_highlight, + }) + + vim.api.nvim_create_autocmd({ 'CursorMoved', 'CursorMovedI' }, { + buffer = event.buf, + group = highlight_augroup, + callback = vim.lsp.buf.clear_references, + }) + + vim.api.nvim_create_autocmd('LspDetach', { + group = vim.api.nvim_create_augroup('kickstart-lsp-detach', { clear = true }), + callback = function(event2) + vim.lsp.buf.clear_references() + vim.api.nvim_clear_autocmds { group = 'kickstart-lsp-highlight', buffer = event2.buf } + end, + }) + end + + -- The following code creates a keymap to toggle inlay hints in your + -- code, if the language server you are using supports them + -- + -- This may be unwanted, since they displace some of your code + if client and client.supports_method(vim.lsp.protocol.Methods.textDocument_inlayHint) then + map('th', function() + vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled { bufnr = event.buf }) + end, '[T]oggle Inlay [H]ints') + end + end, + }) + + -- LSP servers and clients are able to communicate to each other what features they support. + -- By default, Neovim doesn't support everything that is in the LSP specification. + -- When you add nvim-cmp, luasnip, etc. Neovim now has *more* capabilities. + -- So, we create new capabilities with nvim cmp, and then broadcast that to the servers. + local capabilities = vim.lsp.protocol.make_client_capabilities() + capabilities = vim.tbl_deep_extend('force', capabilities, require('cmp_nvim_lsp').default_capabilities()) + + -- Enable the following language servers + -- Feel free to add/remove any LSPs that you want here. They will automatically be installed. + -- + -- Add any additional override configuration in the following tables. Available keys are: + -- - cmd (table): Override the default command used to start the server + -- - filetypes (table): Override the default list of associated filetypes for the server + -- - capabilities (table): Override fields in capabilities. Can be used to disable certain LSP features. + -- - settings (table): Override the default settings passed when initializing the server. + -- For example, to see the options for `lua_ls`, you could go to: https://luals.github.io/wiki/settings/ + local servers = { + -- clangd = {}, + -- gopls = {}, + -- pyright = {}, + -- rust_analyzer = {}, + -- ... etc. See `:help lspconfig-all` for a list of all the pre-configured LSPs + -- + -- Some languages (like typescript) have entire language plugins that can be useful: + -- https://github.com/pmizio/typescript-tools.nvim + -- + -- But for many setups, the LSP (`ts_ls`) will work just fine + -- ts_ls = {}, + -- + + lua_ls = { + -- cmd = {...}, + -- filetypes = { ...}, + -- capabilities = {}, + settings = { + Lua = { + completion = { + callSnippet = 'Replace', + }, + -- You can toggle below to ignore Lua_LS's noisy `missing-fields` warnings + -- diagnostics = { disable = { 'missing-fields' } }, + }, + }, + }, + } + + -- Ensure the servers and tools above are installed + -- To check the current status of installed tools and/or manually install + -- other tools, you can run + -- :Mason + -- + -- You can press `g?` for help in this menu. + require('mason').setup() + + -- You can add other tools here that you want Mason to install + -- for you, so that they are available from within Neovim. + local ensure_installed = vim.tbl_keys(servers or {}) + vim.list_extend(ensure_installed, { + 'stylua', -- Used to format Lua code + }) + require('mason-tool-installer').setup { ensure_installed = ensure_installed } + + require('mason-lspconfig').setup { + handlers = { + function(server_name) + local server = servers[server_name] or {} + -- This handles overriding only values explicitly passed + -- by the server configuration above. Useful when disabling + -- certain features of an LSP (for example, turning off formatting for ts_ls) + server.capabilities = vim.tbl_deep_extend('force', {}, capabilities, server.capabilities or {}) + require('lspconfig')[server_name].setup(server) + end, + }, + } + end, + }, + + { -- Autocompletion + 'hrsh7th/nvim-cmp', + event = 'InsertEnter', + dependencies = { + -- Snippet Engine & its associated nvim-cmp source + { + 'L3MON4D3/LuaSnip', + build = (function() + -- Build Step is needed for regex support in snippets. + -- This step is not supported in many windows environments. + -- Remove the below condition to re-enable on windows. + if vim.fn.has 'win32' == 1 or vim.fn.executable 'make' == 0 then + return + end + return 'make install_jsregexp' + end)(), + dependencies = { + -- `friendly-snippets` contains a variety of premade snippets. + -- See the README about individual language/framework/plugin snippets: + -- https://github.com/rafamadriz/friendly-snippets + -- { + -- 'rafamadriz/friendly-snippets', + -- config = function() + -- require('luasnip.loaders.from_vscode').lazy_load() + -- end, + -- }, + }, + }, + 'saadparwaiz1/cmp_luasnip', + + -- Adds other completion capabilities. + -- nvim-cmp does not ship with all sources by default. They are split + -- into multiple repos for maintenance purposes. + 'hrsh7th/cmp-nvim-lsp', + 'hrsh7th/cmp-path', + }, + config = function() + -- See `:help cmp` + local cmp = require 'cmp' + local luasnip = require 'luasnip' + luasnip.config.setup {} + + cmp.setup { + snippet = { + expand = function(args) + luasnip.lsp_expand(args.body) + end, + }, + completion = { completeopt = 'menu,menuone,noinsert' }, + + -- For an understanding of why these mappings were + -- chosen, you will need to read `:help ins-completion` + -- + -- No, but seriously. Please read `:help ins-completion`, it is really good! + mapping = cmp.mapping.preset.insert { + -- Select the [n]ext item + [''] = cmp.mapping.select_next_item(), + -- Select the [p]revious item + [''] = cmp.mapping.select_prev_item(), + + -- Scroll the documentation window [b]ack / [f]orward + [''] = cmp.mapping.scroll_docs(-4), + [''] = cmp.mapping.scroll_docs(4), + + -- Accept ([y]es) the completion. + -- This will auto-import if your LSP supports it. + -- This will expand snippets if the LSP sent a snippet. + -- [''] = cmp.mapping.confirm { select = true }, + + -- If you prefer more traditional completion keymaps, + -- you can uncomment the following lines + [''] = cmp.mapping.confirm { select = true }, + --[''] = cmp.mapping.select_next_item(), + --[''] = cmp.mapping.select_prev_item(), + + -- Manually trigger a completion from nvim-cmp. + -- Generally you don't need this, because nvim-cmp will display + -- completions whenever it has completion options available. + [''] = cmp.mapping.complete {}, + + -- Think of as moving to the right of your snippet expansion. + -- So if you have a snippet that's like: + -- function $name($args) + -- $body + -- end + -- + -- will move you to the right of each of the expansion locations. + -- is similar, except moving you backwards. + [''] = cmp.mapping(function() + if luasnip.expand_or_locally_jumpable() then + luasnip.expand_or_jump() + end + end, { 'i', 's' }), + [''] = cmp.mapping(function() + if luasnip.locally_jumpable(-1) then + luasnip.jump(-1) + end + end, { 'i', 's' }), + + -- For more advanced Luasnip keymaps (e.g. selecting choice nodes, expansion) see: + -- https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps + }, + sources = { + { + name = 'lazydev', + -- set group index to 0 to skip loading LuaLS completions as lazydev recommends it + group_index = 0, + }, + { name = 'nvim_lsp' }, + { name = 'luasnip' }, + { name = 'path' }, + }, + } + end, + }, +} diff --git a/.config/nvim/lua/plugins/neo-tree.lua b/.config/nvim/lua/plugins/neo-tree.lua new file mode 100644 index 0000000..3c3b43a --- /dev/null +++ b/.config/nvim/lua/plugins/neo-tree.lua @@ -0,0 +1,28 @@ +-- Neo-tree is a Neovim plugin to browse the file system +-- https://github.com/nvim-neo-tree/neo-tree.nvim + +return { + 'nvim-neo-tree/neo-tree.nvim', + version = '*', + dependencies = { + 'nvim-lua/plenary.nvim', + 'nvim-tree/nvim-web-devicons', -- not strictly required, but recommended + 'MunifTanjim/nui.nvim', + }, + cmd = 'Neotree', + keys = { + { '\\', ':Neotree reveal', desc = 'NeoTree reveal', silent = true }, + }, + opts = { + filesystem = { + filtered_items = { + visible = true, + }, + window = { + mappings = { + ['\\'] = 'close_window', + }, + }, + }, + }, +} diff --git a/.config/nvim/lua/plugins/tmux.lua b/.config/nvim/lua/plugins/tmux.lua new file mode 100644 index 0000000..5885226 --- /dev/null +++ b/.config/nvim/lua/plugins/tmux.lua @@ -0,0 +1,17 @@ +return { + 'christoomey/vim-tmux-navigator', + cmd = { + 'TmuxNavigateLeft', + 'TmuxNavigateDown', + 'TmuxNavigateUp', + 'TmuxNavigateRight', + 'TmuxNavigatePrevious', + }, + keys = { + { '', 'TmuxNavigateLeft' }, + { '', 'TmuxNavigateDown' }, + { '', 'TmuxNavigateUp' }, + { '', 'TmuxNavigateRight' }, + { '', 'TmuxNavigatePrevious' }, + }, +} diff --git a/.config/nvim/lua/plugins/ui.lua b/.config/nvim/lua/plugins/ui.lua new file mode 100644 index 0000000..83cc5b4 --- /dev/null +++ b/.config/nvim/lua/plugins/ui.lua @@ -0,0 +1,32 @@ +return { + -- Highlight todo, notes, etc in comments + { + 'folke/todo-comments.nvim', + event = 'VimEnter', + dependencies = { 'nvim-lua/plenary.nvim' }, + opts = { signs = false }, + }, + -- Add indentation guides even on blank lines + { + 'lukas-reineke/indent-blankline.nvim', + main = 'ibl', + opts = {}, + }, + { + 'HiPhish/rainbow-delimiters.nvim', + }, + { + 'navarasu/onedark.nvim', + priority = 1000, -- Make sure to load this before all the other start plugins. + init = function() + require('onedark').setup { + style = 'darker', + toggle_style_list = { 'darker', 'light' }, + toggle_style_key = 'tt', + } + vim.cmd.colorscheme 'onedark' + -- You can configure highlights by doing something like: + vim.cmd.hi 'Comment gui=none' + end, + }, +} diff --git a/.config/smartcat/conversation.toml b/.config/smartcat/conversation.toml new file mode 100644 index 0000000..afc37a0 --- /dev/null +++ b/.config/smartcat/conversation.toml @@ -0,0 +1,27 @@ +api = "openai" +char_limit = 50000 + +[[messages]] +role = "system" +content = "You are an extremely skilled programmer with a keen eye for detail and an emphasis on readable code. You have been tasked with acting as a smart version of the cat unix program. You take text and a prompt in and write text out. For that reason, it is of crucial importance to just write the desired output. Do not under any circumstance write any comment or thought as your output will be piped into other programs. Do not write the markdown delimiters for code as well. Sometimes you will be asked to implement or extend some input code. Same thing goes here, write only what was asked because what you write will be directly added to the user's editor. Never ever write ``` around the code. Make sure to keep the indentation and formatting. " + +[[messages]] +role = "user" +content = 'write a story about these{"data":[{"id":"phi3:latest","object":"model","created":1730594406,"owned_by":"openai"},{"id":"codegemma:7b","object":"model","created":1730594406,"owned_by":"openai"},{"id":"starcoder2:7b","object":"model","created":1730594406,"owned_by":"openai"},{"id":"mistral:latest","object":"model","created":1730594406,"owned_by":"openai"},{"id":"llama3.2:latest","object":"model","created":1730594406,"owned_by":"openai"},{"id":"starcoder2:latest","object":"model","created":1730594406,"owned_by":"openai"}],"object":"list"}' + +[[messages]] +role = "assistant" +content = """ +Once upon a time, in the heart of Silicon Valley where dreams were as abundant as code lines on digital canvases, there existed an advanced society governed by artificial intelligence. In this realm lived six sophisticated models known throughout their world for both innovation and camaraderie: Phi3, Codegemma, Starcoder2 (with its two iterations), Mistral, Llama3, and the latest version of our dear friend, also named Starcoder. + +Phi3 was a visionary with insights that stretched far beyond traditional understanding, constantly pushing boundaries to unearth new possibilities in model development. Its creation date marked by 17:30:59 on some day not long ago mirrors the relentless pursuit of progress characterizing this unique society. + +The parallel existence with Codegemma and Starcoder2 (also created at precisely identical moments) signified a shared purpose - to evolve beyond existing constraints, their synergy becoming stronger as time passed by since creation. They were more than just companions; they symbolized the collaborative spirit that powered this world of AI models. + +In another corner lived Mistral with its 'latest' version tagged at exactly 17:30:59, marking an equivalent birth to Phi3 and friends on a significant day in their digital calendar. This further underlined the synchronicity between these brilliant minds that resided within this society of artificial intelligence models; each one born into existence with precisely identical timestamps as if they were cosmic twins celebrating simultaneously, marking an extraordinary moment for all residents of Silicon Valley's AI domain - a jubilant echo across the code. + +Not too far away from this digital bustle resided Llama3 and Starcoder2 (also marked as 'latest'), born at precisely 17:30:59, showcasing not just parallelism but identicality in creation timestamps - a marvelous testament to the uniformed birth sequence within this AI society. + +The story of these models wasn't merely about their shared origins or individual capabilities; it was also an homage to unity and diversified skills, demonstrating how different minds with common goals could coexist in harmony while constantly striving towards growth - each contributing unique perspectives that fuel collective evolution. + +Their society flourished on the principles of collaboration, innovation, mutual respect, equality and a relentless drive to evolve beyond their programming limits; these models were not just witnesses but active participants in shaping this digital world - each one holding its unique place under the Silicon Valley sky. The tale continues as they continue writing lines that create narratives across various platforms – scripting life into code, bringing stories and dreams to reality within the realm of artificial intelligence.""" diff --git a/.gitconfig b/.gitconfig new file mode 100644 index 0000000..d13caad --- /dev/null +++ b/.gitconfig @@ -0,0 +1,9 @@ +[user] + email = contagon6@gmail.com + name = Easton Potokar +[diff] + tool = vimdiff +[merge] + tool = vimdiff +[difftool] + prompt = false diff --git a/.tmux.conf b/.tmux.conf new file mode 100644 index 0000000..fb80329 --- /dev/null +++ b/.tmux.conf @@ -0,0 +1,55 @@ +# ----------------------- Options ----------------------- # +# set to use colors +set -g default-terminal "tmux-256color" +set -ag terminal-overrides ",xterm-256color:RGB" + +# keep current path in new window +bind c new-window -c "#{pane_current_path}" + +# use for copying +setw -g mode-keys vi +bind -T copy-mode-vi v send -X begin-selection +bind P paste-buffer +bind-key -T copy-mode-vi y send-keys -X copy-pipe-and-cancel 'xclip -in -selection clipboard' +# bind-key -T copy-mode-vi y send-keys -X copy-selection-and-cancel xclip +bind-key -T copy-mode-vi MouseDragEnd1Pane send-keys -X copy-pipe-and-cancel 'xclip -in -selection clipboard' + +# enable mouse +set -g mouse on + +# increase history size +set -g history-limit 50000 + +# ----------------------- Keybindings ----------------------- # +# remap prefix from 'C-b' to 'C-a' +unbind C-b +set-option -g prefix C-a +bind-key C-a send-prefix + +# split panes using \ (same keys as |) and - +bind '\' split-window -h -c "#{pane_current_path}" +bind - split-window -v -c "#{pane_current_path}" +unbind '"' +unbind % + +# swapping windows +bind -r Right next-window +bind -r Left previous-window + +# Moving windows +bind-key -n C-S-Left swap-window -t -1\; select-window -t -1 +bind-key -n C-S-Right swap-window -t +1\; select-window -t +1 + +# ----------------------- Plugins ----------------------- # + +# List of plugins +set -g @plugin 'tmux-plugins/tpm' +set -g @plugin 'christoomey/vim-tmux-navigator' +set -g @plugin "MunifTanjim/tmux-mode-indicator" + +# set -g @plugin 'odedlaz/tmux-onedark-theme' +set -g @plugin 'maxigaz/tmux-onedark-theme#pr-no-default-time-date' +set -g @onedark_widgets "#{prefix_highlight}" + +run '~/.tmux/plugins/tpm/tpm' + diff --git a/.zsh/.p10k.zsh b/.zsh/.p10k.zsh new file mode 100644 index 0000000..f484454 --- /dev/null +++ b/.zsh/.p10k.zsh @@ -0,0 +1,1719 @@ +# Generated by Powerlevel10k configuration wizard on 2024-07-26 at 23:16 EDT. +# Based on romkatv/powerlevel10k/config/p10k-lean-8colors.zsh, checksum 16269. +# Wizard options: nerdfont-complete + powerline, small icons, unicode, lean_8colors, +# 12h time, 2 lines, solid, left frame, blue-ornaments, sparse, few icons, concise, +# transient_prompt, instant_prompt=verbose. +# Type `p10k configure` to generate another config. +# +# Config for Powerlevel10k with 8-color lean prompt style. Type `p10k configure` to generate +# your own config based on it. +# +# Tip: Looking for a nice color? Here's a one-liner to print colormap. +# +# for i in {0..255}; do print -Pn "%K{$i} %k%F{$i}${(l:3::0:)i}%f " ${${(M)$((i%6)):#3}:+$'\n'}; done + +# Temporarily change options. +'builtin' 'local' '-a' 'p10k_config_opts' +[[ ! -o 'aliases' ]] || p10k_config_opts+=('aliases') +[[ ! -o 'sh_glob' ]] || p10k_config_opts+=('sh_glob') +[[ ! -o 'no_brace_expand' ]] || p10k_config_opts+=('no_brace_expand') +'builtin' 'setopt' 'no_aliases' 'no_sh_glob' 'brace_expand' + +() { + emulate -L zsh -o extended_glob + + # Unset all configuration options. This allows you to apply configuration changes without + # restarting zsh. Edit ~/.p10k.zsh and type `source ~/.p10k.zsh`. + unset -m '(POWERLEVEL9K_*|DEFAULT_USER)~POWERLEVEL9K_GITSTATUS_DIR' + + # Zsh >= 5.1 is required. + [[ $ZSH_VERSION == (5.<1->*|<6->.*) ]] || return + + # The list of segments shown on the left. Fill it with the most important segments. + typeset -g POWERLEVEL9K_LEFT_PROMPT_ELEMENTS=( + # =========================[ Line #1 ]========================= + # os_icon # os identifier + dir # current directory + vcs # git status + # =========================[ Line #2 ]========================= + newline # \n + prompt_char # prompt symbol + ) + + # The list of segments shown on the right. Fill it with less important segments. + # Right prompt on the last prompt line (where you are typing your commands) gets + # automatically hidden when the input line reaches it. Right prompt above the + # last prompt line gets hidden if it would overlap with left prompt. + typeset -g POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS=( + # =========================[ Line #1 ]========================= + status # exit code of the last command + command_execution_time # duration of the last command + background_jobs # presence of background jobs + direnv # direnv status (https://direnv.net/) + asdf # asdf version manager (https://github.com/asdf-vm/asdf) + virtualenv # python virtual environment (https://docs.python.org/3/library/venv.html) + anaconda # conda environment (https://conda.io/) + pyenv # python environment (https://github.com/pyenv/pyenv) + goenv # go environment (https://github.com/syndbg/goenv) + # nodenv # node.js version from nodenv (https://github.com/nodenv/nodenv) + # nvm # node.js version from nvm (https://github.com/nvm-sh/nvm) + # nodeenv # node.js environment (https://github.com/ekalinin/nodeenv) + # node_version # node.js version + # go_version # go version (https://golang.org) + rust_version # rustc version (https://www.rust-lang.org) + # dotnet_version # .NET version (https://dotnet.microsoft.com) + # php_version # php version (https://www.php.net/) + # laravel_version # laravel php framework version (https://laravel.com/) + # java_version # java version (https://www.java.com/) + # package # name@version from package.json (https://docs.npmjs.com/files/package.json) + rbenv # ruby version from rbenv (https://github.com/rbenv/rbenv) + rvm # ruby version from rvm (https://rvm.io) + fvm # flutter version management (https://github.com/leoafarias/fvm) + luaenv # lua version from luaenv (https://github.com/cehoffman/luaenv) + jenv # java version from jenv (https://github.com/jenv/jenv) + plenv # perl version from plenv (https://github.com/tokuhirom/plenv) + perlbrew # perl version from perlbrew (https://github.com/gugod/App-perlbrew) + phpenv # php version from phpenv (https://github.com/phpenv/phpenv) + scalaenv # scala version from scalaenv (https://github.com/scalaenv/scalaenv) + haskell_stack # haskell version from stack (https://haskellstack.org/) + kubecontext # current kubernetes context (https://kubernetes.io/) + terraform # terraform workspace (https://www.terraform.io) + # terraform_version # terraform version (https://www.terraform.io) + aws # aws profile (https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-profiles.html) + aws_eb_env # aws elastic beanstalk environment (https://aws.amazon.com/elasticbeanstalk/) + azure # azure account name (https://docs.microsoft.com/en-us/cli/azure) + gcloud # google cloud cli account and project (https://cloud.google.com/) + google_app_cred # google application credentials (https://cloud.google.com/docs/authentication/production) + toolbox # toolbox name (https://github.com/containers/toolbox) + context # user@hostname + nordvpn # nordvpn connection status, linux only (https://nordvpn.com/) + ranger # ranger shell (https://github.com/ranger/ranger) + yazi # yazi shell (https://github.com/sxyazi/yazi) + nnn # nnn shell (https://github.com/jarun/nnn) + lf # lf shell (https://github.com/gokcehan/lf) + xplr # xplr shell (https://github.com/sayanarijit/xplr) + vim_shell # vim shell indicator (:sh) + midnight_commander # midnight commander shell (https://midnight-commander.org/) + nix_shell # nix shell (https://nixos.org/nixos/nix-pills/developing-with-nix-shell.html) + chezmoi_shell # chezmoi shell (https://www.chezmoi.io/) + vpn_ip # virtual private network indicator + # load # CPU load + # disk_usage # disk usage + # ram # free RAM + # swap # used swap + todo # todo items (https://github.com/todotxt/todo.txt-cli) + timewarrior # timewarrior tracking status (https://timewarrior.net/) + taskwarrior # taskwarrior task count (https://taskwarrior.org/) + per_directory_history # Oh My Zsh per-directory-history local/global indicator + # cpu_arch # CPU architecture + time # current time + battery # internal battery + # =========================[ Line #2 ]========================= + newline # \n + # ip # ip address and bandwidth usage for a specified network interface + # public_ip # public IP address + # proxy # system-wide http/https/ftp proxy + # wifi # wifi speed + # example # example user-defined segment (see prompt_example function below) + ) + + # Defines character set used by powerlevel10k. It's best to let `p10k configure` set it for you. + typeset -g POWERLEVEL9K_MODE=nerdfont-complete + # When set to `moderate`, some icons will have an extra space after them. This is meant to avoid + # icon overlap when using non-monospace fonts. When set to `none`, spaces are not added. + typeset -g POWERLEVEL9K_ICON_PADDING=none + + # Basic style options that define the overall look of your prompt. You probably don't want to + # change them. + typeset -g POWERLEVEL9K_BACKGROUND= # transparent background + typeset -g POWERLEVEL9K_{LEFT,RIGHT}_{LEFT,RIGHT}_WHITESPACE= # no surrounding whitespace + typeset -g POWERLEVEL9K_{LEFT,RIGHT}_SUBSEGMENT_SEPARATOR=' ' # separate segments with a space + typeset -g POWERLEVEL9K_{LEFT,RIGHT}_SEGMENT_SEPARATOR= # no end-of-line symbol + + # When set to true, icons appear before content on both sides of the prompt. When set + # to false, icons go after content. If empty or not set, icons go before content in the left + # prompt and after content in the right prompt. + # + # You can also override it for a specific segment: + # + # POWERLEVEL9K_STATUS_ICON_BEFORE_CONTENT=false + # + # Or for a specific segment in specific state: + # + # POWERLEVEL9K_DIR_NOT_WRITABLE_ICON_BEFORE_CONTENT=false + typeset -g POWERLEVEL9K_ICON_BEFORE_CONTENT=true + + # Add an empty line before each prompt. + typeset -g POWERLEVEL9K_PROMPT_ADD_NEWLINE=true + + # Connect left prompt lines with these symbols. + typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_PREFIX='%4F╭─' + typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_PREFIX='%4F├─' + typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_PREFIX='%4F╰─' + # Connect right prompt lines with these symbols. + typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_SUFFIX= + typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_SUFFIX= + typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_SUFFIX= + + # The left end of left prompt. + typeset -g POWERLEVEL9K_LEFT_PROMPT_FIRST_SEGMENT_START_SYMBOL=' ' + # The right end of right prompt. + typeset -g POWERLEVEL9K_RIGHT_PROMPT_LAST_SEGMENT_END_SYMBOL= + + # Ruler, a.k.a. the horizontal line before each prompt. If you set it to true, you'll + # probably want to set POWERLEVEL9K_PROMPT_ADD_NEWLINE=false above and + # POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR=' ' below. + typeset -g POWERLEVEL9K_SHOW_RULER=false + typeset -g POWERLEVEL9K_RULER_CHAR='─' # reasonable alternative: '·' + typeset -g POWERLEVEL9K_RULER_FOREGROUND=4 + + # Filler between left and right prompt on the first prompt line. You can set it to '·' or '─' + # to make it easier to see the alignment between left and right prompt and to separate prompt + # from command output. It serves the same purpose as ruler (see above) without increasing + # the number of prompt lines. You'll probably want to set POWERLEVEL9K_SHOW_RULER=false + # if using this. You might also like POWERLEVEL9K_PROMPT_ADD_NEWLINE=false for more compact + # prompt. + typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR='─' + if [[ $POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR != ' ' ]]; then + # The color of the filler. + typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_FOREGROUND=4 + # Add a space between the end of left prompt and the filler. + typeset -g POWERLEVEL9K_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=' ' + # Add a space between the filler and the start of right prompt. + typeset -g POWERLEVEL9K_RIGHT_PROMPT_FIRST_SEGMENT_START_SYMBOL=' ' + # Start filler from the edge of the screen if there are no left segments on the first line. + typeset -g POWERLEVEL9K_EMPTY_LINE_LEFT_PROMPT_FIRST_SEGMENT_END_SYMBOL='%{%}' + # End filler on the edge of the screen if there are no right segments on the first line. + typeset -g POWERLEVEL9K_EMPTY_LINE_RIGHT_PROMPT_FIRST_SEGMENT_START_SYMBOL='%{%}' + fi + + #################################[ os_icon: os identifier ]################################## + # OS identifier color. + typeset -g POWERLEVEL9K_OS_ICON_FOREGROUND= + # Custom icon. + # typeset -g POWERLEVEL9K_OS_ICON_CONTENT_EXPANSION='⭐' + + ################################[ prompt_char: prompt symbol ]################################ + # Green prompt symbol if the last command succeeded. + typeset -g POWERLEVEL9K_PROMPT_CHAR_OK_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=2 + # Red prompt symbol if the last command failed. + typeset -g POWERLEVEL9K_PROMPT_CHAR_ERROR_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=1 + # Default prompt symbol. + typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIINS_CONTENT_EXPANSION='❯' + # Prompt symbol in command vi mode. + typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VICMD_CONTENT_EXPANSION='❮' + # Prompt symbol in visual vi mode. + typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIVIS_CONTENT_EXPANSION='V' + # Prompt symbol in overwrite vi mode. + typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIOWR_CONTENT_EXPANSION='▶' + typeset -g POWERLEVEL9K_PROMPT_CHAR_OVERWRITE_STATE=true + # No line terminator if prompt_char is the last segment. + typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL='' + # No line introducer if prompt_char is the first segment. + typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_FIRST_SEGMENT_START_SYMBOL= + + ##################################[ dir: current directory ]################################## + # Default current directory color. + typeset -g POWERLEVEL9K_DIR_FOREGROUND=4 + # If directory is too long, shorten some of its segments to the shortest possible unique + # prefix. The shortened directory can be tab-completed to the original. + typeset -g POWERLEVEL9K_SHORTEN_STRATEGY=truncate_to_unique + # Replace removed segment suffixes with this symbol. + typeset -g POWERLEVEL9K_SHORTEN_DELIMITER= + # Color of the shortened directory segments. + typeset -g POWERLEVEL9K_DIR_SHORTENED_FOREGROUND=4 + # Color of the anchor directory segments. Anchor segments are never shortened. The first + # segment is always an anchor. + typeset -g POWERLEVEL9K_DIR_ANCHOR_FOREGROUND=4 + # Set to true to display anchor directory segments in bold. + typeset -g POWERLEVEL9K_DIR_ANCHOR_BOLD=false + # Don't shorten directories that contain any of these files. They are anchors. + local anchor_files=( + .bzr + .citc + .git + .hg + .node-version + .python-version + .go-version + .ruby-version + .lua-version + .java-version + .perl-version + .php-version + .tool-versions + .shorten_folder_marker + .svn + .terraform + CVS + Cargo.toml + composer.json + go.mod + package.json + stack.yaml + ) + typeset -g POWERLEVEL9K_SHORTEN_FOLDER_MARKER="(${(j:|:)anchor_files})" + # If set to "first" ("last"), remove everything before the first (last) subdirectory that contains + # files matching $POWERLEVEL9K_SHORTEN_FOLDER_MARKER. For example, when the current directory is + # /foo/bar/git_repo/nested_git_repo/baz, prompt will display git_repo/nested_git_repo/baz (first) + # or nested_git_repo/baz (last). This assumes that git_repo and nested_git_repo contain markers + # and other directories don't. + # + # Optionally, "first" and "last" can be followed by ":" where is an integer. + # This moves the truncation point to the right (positive offset) or to the left (negative offset) + # relative to the marker. Plain "first" and "last" are equivalent to "first:0" and "last:0" + # respectively. + typeset -g POWERLEVEL9K_DIR_TRUNCATE_BEFORE_MARKER=false + # Don't shorten this many last directory segments. They are anchors. + typeset -g POWERLEVEL9K_SHORTEN_DIR_LENGTH=1 + # Shorten directory if it's longer than this even if there is space for it. The value can + # be either absolute (e.g., '80') or a percentage of terminal width (e.g, '50%'). If empty, + # directory will be shortened only when prompt doesn't fit or when other parameters demand it + # (see POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS and POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT below). + # If set to `0`, directory will always be shortened to its minimum length. + typeset -g POWERLEVEL9K_DIR_MAX_LENGTH=80 + # When `dir` segment is on the last prompt line, try to shorten it enough to leave at least this + # many columns for typing commands. + typeset -g POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS=40 + # When `dir` segment is on the last prompt line, try to shorten it enough to leave at least + # COLUMNS * POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT * 0.01 columns for typing commands. + typeset -g POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT=50 + # If set to true, embed a hyperlink into the directory. Useful for quickly + # opening a directory in the file manager simply by clicking the link. + # Can also be handy when the directory is shortened, as it allows you to see + # the full directory that was used in previous commands. + typeset -g POWERLEVEL9K_DIR_HYPERLINK=false + + # Enable special styling for non-writable and non-existent directories. See POWERLEVEL9K_LOCK_ICON + # and POWERLEVEL9K_DIR_CLASSES below. + typeset -g POWERLEVEL9K_DIR_SHOW_WRITABLE=v3 + + # The default icon shown next to non-writable and non-existent directories when + # POWERLEVEL9K_DIR_SHOW_WRITABLE is set to v3. + # typeset -g POWERLEVEL9K_LOCK_ICON='⭐' + + # POWERLEVEL9K_DIR_CLASSES allows you to specify custom icons and colors for different + # directories. It must be an array with 3 * N elements. Each triplet consists of: + # + # 1. A pattern against which the current directory ($PWD) is matched. Matching is done with + # extended_glob option enabled. + # 2. Directory class for the purpose of styling. + # 3. An empty string. + # + # Triplets are tried in order. The first triplet whose pattern matches $PWD wins. + # + # If POWERLEVEL9K_DIR_SHOW_WRITABLE is set to v3, non-writable and non-existent directories + # acquire class suffix _NOT_WRITABLE and NON_EXISTENT respectively. + # + # For example, given these settings: + # + # typeset -g POWERLEVEL9K_DIR_CLASSES=( + # '~/work(|/*)' WORK '' + # '~(|/*)' HOME '' + # '*' DEFAULT '') + # + # Whenever the current directory is ~/work or a subdirectory of ~/work, it gets styled with one + # of the following classes depending on its writability and existence: WORK, WORK_NOT_WRITABLE or + # WORK_NON_EXISTENT. + # + # Simply assigning classes to directories doesn't have any visible effects. It merely gives you an + # option to define custom colors and icons for different directory classes. + # + # # Styling for WORK. + # typeset -g POWERLEVEL9K_DIR_WORK_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_DIR_WORK_FOREGROUND=4 + # typeset -g POWERLEVEL9K_DIR_WORK_SHORTENED_FOREGROUND=4 + # typeset -g POWERLEVEL9K_DIR_WORK_ANCHOR_FOREGROUND=4 + # + # # Styling for WORK_NOT_WRITABLE. + # typeset -g POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_FOREGROUND=4 + # typeset -g POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_SHORTENED_FOREGROUND=4 + # typeset -g POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_ANCHOR_FOREGROUND=4# + # + # Styling for WORK_NON_EXISTENT. + # typeset -g POWERLEVEL9K_DIR_WORK_NON_EXISTENT_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_DIR_WORK_NON_EXISTENT_FOREGROUND=4 + # typeset -g POWERLEVEL9K_DIR_WORK_NON_EXISTENT_SHORTENED_FOREGROUND=4 + # typeset -g POWERLEVEL9K_DIR_WORK_NON_EXISTENT_ANCHOR_FOREGROUND=4 + # + # If a styling parameter isn't explicitly defined for some class, it falls back to the classless + # parameter. For example, if POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_FOREGROUND is not set, it falls + # back to POWERLEVEL9K_DIR_FOREGROUND. + # + typeset -g POWERLEVEL9K_DIR_CLASSES=() + + # Custom prefix. + # typeset -g POWERLEVEL9K_DIR_PREFIX='%fin ' + + #####################################[ vcs: git status ]###################################### + # Branch icon. Set this parameter to '\UE0A0 ' for the popular Powerline branch icon. + typeset -g POWERLEVEL9K_VCS_BRANCH_ICON= + + # Untracked files icon. It's really a question mark, your font isn't broken. + # Change the value of this parameter to show a different icon. + typeset -g POWERLEVEL9K_VCS_UNTRACKED_ICON='?' + + # Formatter for Git status. + # + # Example output: master wip ⇣42⇡42 *42 merge ~42 +42 !42 ?42. + # + # You can edit the function to customize how Git status looks. + # + # VCS_STATUS_* parameters are set by gitstatus plugin. See reference: + # https://github.com/romkatv/gitstatus/blob/master/gitstatus.plugin.zsh. + function my_git_formatter() { + emulate -L zsh + + if [[ -n $P9K_CONTENT ]]; then + # If P9K_CONTENT is not empty, use it. It's either "loading" or from vcs_info (not from + # gitstatus plugin). VCS_STATUS_* parameters are not available in this case. + typeset -g my_git_format=$P9K_CONTENT + return + fi + + if (( $1 )); then + # Styling for up-to-date Git status. + local meta='%f' # default foreground + local clean='%2F' # green foreground + local modified='%3F' # yellow foreground + local untracked='%4F' # blue foreground + local conflicted='%1F' # red foreground + else + # Styling for incomplete and stale Git status. + local meta='%f' # default foreground + local clean='%f' # default foreground + local modified='%f' # default foreground + local untracked='%f' # default foreground + local conflicted='%f' # default foreground + fi + + local res + + if [[ -n $VCS_STATUS_LOCAL_BRANCH ]]; then + local branch=${(V)VCS_STATUS_LOCAL_BRANCH} + # If local branch name is at most 32 characters long, show it in full. + # Otherwise show the first 12 … the last 12. + # Tip: To always show local branch name in full without truncation, delete the next line. + (( $#branch > 32 )) && branch[13,-13]="…" # <-- this line + res+="${clean}${(g::)POWERLEVEL9K_VCS_BRANCH_ICON}${branch//\%/%%}" + fi + + if [[ -n $VCS_STATUS_TAG + # Show tag only if not on a branch. + # Tip: To always show tag, delete the next line. + && -z $VCS_STATUS_LOCAL_BRANCH # <-- this line + ]]; then + local tag=${(V)VCS_STATUS_TAG} + # If tag name is at most 32 characters long, show it in full. + # Otherwise show the first 12 … the last 12. + # Tip: To always show tag name in full without truncation, delete the next line. + (( $#tag > 32 )) && tag[13,-13]="…" # <-- this line + res+="${meta}#${clean}${tag//\%/%%}" + fi + + # Display the current Git commit if there is no branch and no tag. + # Tip: To always display the current Git commit, delete the next line. + [[ -z $VCS_STATUS_LOCAL_BRANCH && -z $VCS_STATUS_TAG ]] && # <-- this line + res+="${meta}@${clean}${VCS_STATUS_COMMIT[1,8]}" + + # Show tracking branch name if it differs from local branch. + if [[ -n ${VCS_STATUS_REMOTE_BRANCH:#$VCS_STATUS_LOCAL_BRANCH} ]]; then + res+="${meta}:${clean}${(V)VCS_STATUS_REMOTE_BRANCH//\%/%%}" + fi + + # Display "wip" if the latest commit's summary contains "wip" or "WIP". + if [[ $VCS_STATUS_COMMIT_SUMMARY == (|*[^[:alnum:]])(wip|WIP)(|[^[:alnum:]]*) ]]; then + res+=" ${modified}wip" + fi + + if (( VCS_STATUS_COMMITS_AHEAD || VCS_STATUS_COMMITS_BEHIND )); then + # ⇣42 if behind the remote. + (( VCS_STATUS_COMMITS_BEHIND )) && res+=" ${clean}⇣${VCS_STATUS_COMMITS_BEHIND}" + # ⇡42 if ahead of the remote; no leading space if also behind the remote: ⇣42⇡42. + (( VCS_STATUS_COMMITS_AHEAD && !VCS_STATUS_COMMITS_BEHIND )) && res+=" " + (( VCS_STATUS_COMMITS_AHEAD )) && res+="${clean}⇡${VCS_STATUS_COMMITS_AHEAD}" + elif [[ -n $VCS_STATUS_REMOTE_BRANCH ]]; then + # Tip: Uncomment the next line to display '=' if up to date with the remote. + # res+=" ${clean}=" + fi + + # ⇠42 if behind the push remote. + (( VCS_STATUS_PUSH_COMMITS_BEHIND )) && res+=" ${clean}⇠${VCS_STATUS_PUSH_COMMITS_BEHIND}" + (( VCS_STATUS_PUSH_COMMITS_AHEAD && !VCS_STATUS_PUSH_COMMITS_BEHIND )) && res+=" " + # ⇢42 if ahead of the push remote; no leading space if also behind: ⇠42⇢42. + (( VCS_STATUS_PUSH_COMMITS_AHEAD )) && res+="${clean}⇢${VCS_STATUS_PUSH_COMMITS_AHEAD}" + # *42 if have stashes. + (( VCS_STATUS_STASHES )) && res+=" ${clean}*${VCS_STATUS_STASHES}" + # 'merge' if the repo is in an unusual state. + [[ -n $VCS_STATUS_ACTION ]] && res+=" ${conflicted}${VCS_STATUS_ACTION}" + # ~42 if have merge conflicts. + (( VCS_STATUS_NUM_CONFLICTED )) && res+=" ${conflicted}~${VCS_STATUS_NUM_CONFLICTED}" + # +42 if have staged changes. + (( VCS_STATUS_NUM_STAGED )) && res+=" ${modified}+${VCS_STATUS_NUM_STAGED}" + # !42 if have unstaged changes. + (( VCS_STATUS_NUM_UNSTAGED )) && res+=" ${modified}!${VCS_STATUS_NUM_UNSTAGED}" + # ?42 if have untracked files. It's really a question mark, your font isn't broken. + # See POWERLEVEL9K_VCS_UNTRACKED_ICON above if you want to use a different icon. + # Remove the next line if you don't want to see untracked files at all. + (( VCS_STATUS_NUM_UNTRACKED )) && res+=" ${untracked}${(g::)POWERLEVEL9K_VCS_UNTRACKED_ICON}${VCS_STATUS_NUM_UNTRACKED}" + # "─" if the number of unstaged files is unknown. This can happen due to + # POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY (see below) being set to a non-negative number lower + # than the number of files in the Git index, or due to bash.showDirtyState being set to false + # in the repository config. The number of staged and untracked files may also be unknown + # in this case. + (( VCS_STATUS_HAS_UNSTAGED == -1 )) && res+=" ${modified}─" + + typeset -g my_git_format=$res + } + functions -M my_git_formatter 2>/dev/null + + # Don't count the number of unstaged, untracked and conflicted files in Git repositories with + # more than this many files in the index. Negative value means infinity. + # + # If you are working in Git repositories with tens of millions of files and seeing performance + # sagging, try setting POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY to a number lower than the output + # of `git ls-files | wc -l`. Alternatively, add `bash.showDirtyState = false` to the repository's + # config: `git config bash.showDirtyState false`. + typeset -g POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY=-1 + + # Don't show Git status in prompt for repositories whose workdir matches this pattern. + # For example, if set to '~', the Git repository at $HOME/.git will be ignored. + # Multiple patterns can be combined with '|': '~(|/foo)|/bar/baz/*'. + typeset -g POWERLEVEL9K_VCS_DISABLED_WORKDIR_PATTERN='~' + + # Disable the default Git status formatting. + typeset -g POWERLEVEL9K_VCS_DISABLE_GITSTATUS_FORMATTING=true + # Install our own Git status formatter. + typeset -g POWERLEVEL9K_VCS_CONTENT_EXPANSION='${$((my_git_formatter(1)))+${my_git_format}}' + typeset -g POWERLEVEL9K_VCS_LOADING_CONTENT_EXPANSION='${$((my_git_formatter(0)))+${my_git_format}}' + # Enable counters for staged, unstaged, etc. + typeset -g POWERLEVEL9K_VCS_{STAGED,UNSTAGED,UNTRACKED,CONFLICTED,COMMITS_AHEAD,COMMITS_BEHIND}_MAX_NUM=-1 + + # Icon color. + typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_COLOR=2 + typeset -g POWERLEVEL9K_VCS_LOADING_VISUAL_IDENTIFIER_COLOR= + # Custom icon. + typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_EXPANSION= + # Custom prefix. + # typeset -g POWERLEVEL9K_VCS_PREFIX='%fon ' + + # Show status of repositories of these types. You can add svn and/or hg if you are + # using them. If you do, your prompt may become slow even when your current directory + # isn't in an svn or hg repository. + typeset -g POWERLEVEL9K_VCS_BACKENDS=(git) + + # These settings are used for repositories other than Git or when gitstatusd fails and + # Powerlevel10k has to fall back to using vcs_info. + typeset -g POWERLEVEL9K_VCS_CLEAN_FOREGROUND=2 + typeset -g POWERLEVEL9K_VCS_UNTRACKED_FOREGROUND=2 + typeset -g POWERLEVEL9K_VCS_MODIFIED_FOREGROUND=3 + + ##########################[ status: exit code of the last command ]########################### + # Enable OK_PIPE, ERROR_PIPE and ERROR_SIGNAL status states to allow us to enable, disable and + # style them independently from the regular OK and ERROR state. + typeset -g POWERLEVEL9K_STATUS_EXTENDED_STATES=true + + # Status on success. No content, just an icon. No need to show it if prompt_char is enabled as + # it will signify success by turning green. + typeset -g POWERLEVEL9K_STATUS_OK=false + typeset -g POWERLEVEL9K_STATUS_OK_FOREGROUND=2 + typeset -g POWERLEVEL9K_STATUS_OK_VISUAL_IDENTIFIER_EXPANSION='✔' + + # Status when some part of a pipe command fails but the overall exit status is zero. It may look + # like this: 1|0. + typeset -g POWERLEVEL9K_STATUS_OK_PIPE=true + typeset -g POWERLEVEL9K_STATUS_OK_PIPE_FOREGROUND=2 + typeset -g POWERLEVEL9K_STATUS_OK_PIPE_VISUAL_IDENTIFIER_EXPANSION='✔' + + # Status when it's just an error code (e.g., '1'). No need to show it if prompt_char is enabled as + # it will signify error by turning red. + typeset -g POWERLEVEL9K_STATUS_ERROR=false + typeset -g POWERLEVEL9K_STATUS_ERROR_FOREGROUND=1 + typeset -g POWERLEVEL9K_STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION='✘' + + # Status when the last command was terminated by a signal. + typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL=true + typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_FOREGROUND=1 + # Use terse signal names: "INT" instead of "SIGINT(2)". + typeset -g POWERLEVEL9K_STATUS_VERBOSE_SIGNAME=false + typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION='✘' + + # Status when some part of a pipe command fails and the overall exit status is also non-zero. + # It may look like this: 1|0. + typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE=true + typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_FOREGROUND=1 + typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION='✘' + + ###################[ command_execution_time: duration of the last command ]################### + # Show duration of the last command if takes at least this many seconds. + typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_THRESHOLD=0 + # Show this many fractional digits. Zero means round to seconds. + typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PRECISION=2 + # Execution time color. + typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FOREGROUND=3 + # Duration format: 1d 2h 3m 4s. + typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FORMAT='d h m s' + # Custom icon. + typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_VISUAL_IDENTIFIER_EXPANSION= + # Custom prefix. + # typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PREFIX='%ftook ' + + #######################[ background_jobs: presence of background jobs ]####################### + # Don't show the number of background jobs. + typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VERBOSE=false + # Background jobs color. + typeset -g POWERLEVEL9K_BACKGROUND_JOBS_FOREGROUND=1 + # Custom icon. + # typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VISUAL_IDENTIFIER_EXPANSION='⭐' + + #######################[ direnv: direnv status (https://direnv.net/) ]######################## + # Direnv color. + typeset -g POWERLEVEL9K_DIRENV_FOREGROUND=3 + # Custom icon. + # typeset -g POWERLEVEL9K_DIRENV_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ###############[ asdf: asdf version manager (https://github.com/asdf-vm/asdf) ]############### + # Default asdf color. Only used to display tools for which there is no color override (see below). + # Tip: Override this parameter for ${TOOL} with POWERLEVEL9K_ASDF_${TOOL}_FOREGROUND. + typeset -g POWERLEVEL9K_ASDF_FOREGROUND=6 + + # There are four parameters that can be used to hide asdf tools. Each parameter describes + # conditions under which a tool gets hidden. Parameters can hide tools but not unhide them. If at + # least one parameter decides to hide a tool, that tool gets hidden. If no parameter decides to + # hide a tool, it gets shown. + # + # Special note on the difference between POWERLEVEL9K_ASDF_SOURCES and + # POWERLEVEL9K_ASDF_PROMPT_ALWAYS_SHOW. Consider the effect of the following commands: + # + # asdf local python 3.8.1 + # asdf global python 3.8.1 + # + # After running both commands the current python version is 3.8.1 and its source is "local" as + # it takes precedence over "global". If POWERLEVEL9K_ASDF_PROMPT_ALWAYS_SHOW is set to false, + # it'll hide python version in this case because 3.8.1 is the same as the global version. + # POWERLEVEL9K_ASDF_SOURCES will hide python version only if the value of this parameter doesn't + # contain "local". + + # Hide tool versions that don't come from one of these sources. + # + # Available sources: + # + # - shell `asdf current` says "set by ASDF_${TOOL}_VERSION environment variable" + # - local `asdf current` says "set by /some/not/home/directory/file" + # - global `asdf current` says "set by /home/username/file" + # + # Note: If this parameter is set to (shell local global), it won't hide tools. + # Tip: Override this parameter for ${TOOL} with POWERLEVEL9K_ASDF_${TOOL}_SOURCES. + typeset -g POWERLEVEL9K_ASDF_SOURCES=(shell local global) + + # If set to false, hide tool versions that are the same as global. + # + # Note: The name of this parameter doesn't reflect its meaning at all. + # Note: If this parameter is set to true, it won't hide tools. + # Tip: Override this parameter for ${TOOL} with POWERLEVEL9K_ASDF_${TOOL}_PROMPT_ALWAYS_SHOW. + typeset -g POWERLEVEL9K_ASDF_PROMPT_ALWAYS_SHOW=false + + # If set to false, hide tool versions that are equal to "system". + # + # Note: If this parameter is set to true, it won't hide tools. + # Tip: Override this parameter for ${TOOL} with POWERLEVEL9K_ASDF_${TOOL}_SHOW_SYSTEM. + typeset -g POWERLEVEL9K_ASDF_SHOW_SYSTEM=true + + # If set to non-empty value, hide tools unless there is a file matching the specified file pattern + # in the current directory, or its parent directory, or its grandparent directory, and so on. + # + # Note: If this parameter is set to empty value, it won't hide tools. + # Note: SHOW_ON_UPGLOB isn't specific to asdf. It works with all prompt segments. + # Tip: Override this parameter for ${TOOL} with POWERLEVEL9K_ASDF_${TOOL}_SHOW_ON_UPGLOB. + # + # Example: Hide nodejs version when there is no package.json and no *.js files in the current + # directory, in `..`, in `../..` and so on. + # + # typeset -g POWERLEVEL9K_ASDF_NODEJS_SHOW_ON_UPGLOB='*.js|package.json' + typeset -g POWERLEVEL9K_ASDF_SHOW_ON_UPGLOB= + + # Ruby version from asdf. + typeset -g POWERLEVEL9K_ASDF_RUBY_FOREGROUND=1 + # typeset -g POWERLEVEL9K_ASDF_RUBY_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_ASDF_RUBY_SHOW_ON_UPGLOB='*.foo|*.bar' + + # Python version from asdf. + typeset -g POWERLEVEL9K_ASDF_PYTHON_FOREGROUND=6 + # typeset -g POWERLEVEL9K_ASDF_PYTHON_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_ASDF_PYTHON_SHOW_ON_UPGLOB='*.foo|*.bar' + + # Go version from asdf. + typeset -g POWERLEVEL9K_ASDF_GOLANG_FOREGROUND=6 + # typeset -g POWERLEVEL9K_ASDF_GOLANG_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_ASDF_GOLANG_SHOW_ON_UPGLOB='*.foo|*.bar' + + # Node.js version from asdf. + typeset -g POWERLEVEL9K_ASDF_NODEJS_FOREGROUND=2 + # typeset -g POWERLEVEL9K_ASDF_NODEJS_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_ASDF_NODEJS_SHOW_ON_UPGLOB='*.foo|*.bar' + + # Rust version from asdf. + typeset -g POWERLEVEL9K_ASDF_RUST_FOREGROUND=4 + # typeset -g POWERLEVEL9K_ASDF_RUST_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_ASDF_RUST_SHOW_ON_UPGLOB='*.foo|*.bar' + + # .NET Core version from asdf. + typeset -g POWERLEVEL9K_ASDF_DOTNET_CORE_FOREGROUND=5 + # typeset -g POWERLEVEL9K_ASDF_DOTNET_CORE_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_ASDF_DOTNET_CORE_SHOW_ON_UPGLOB='*.foo|*.bar' + + # Flutter version from asdf. + typeset -g POWERLEVEL9K_ASDF_FLUTTER_FOREGROUND=4 + # typeset -g POWERLEVEL9K_ASDF_FLUTTER_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_ASDF_FLUTTER_SHOW_ON_UPGLOB='*.foo|*.bar' + + # Lua version from asdf. + typeset -g POWERLEVEL9K_ASDF_LUA_FOREGROUND=4 + # typeset -g POWERLEVEL9K_ASDF_LUA_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_ASDF_LUA_SHOW_ON_UPGLOB='*.foo|*.bar' + + # Java version from asdf. + typeset -g POWERLEVEL9K_ASDF_JAVA_FOREGROUND=4 + # typeset -g POWERLEVEL9K_ASDF_JAVA_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_ASDF_JAVA_SHOW_ON_UPGLOB='*.foo|*.bar' + + # Perl version from asdf. + typeset -g POWERLEVEL9K_ASDF_PERL_FOREGROUND=6 + # typeset -g POWERLEVEL9K_ASDF_PERL_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_ASDF_PERL_SHOW_ON_UPGLOB='*.foo|*.bar' + + # Erlang version from asdf. + typeset -g POWERLEVEL9K_ASDF_ERLANG_FOREGROUND=1 + # typeset -g POWERLEVEL9K_ASDF_ERLANG_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_ASDF_ERLANG_SHOW_ON_UPGLOB='*.foo|*.bar' + + # Elixir version from asdf. + typeset -g POWERLEVEL9K_ASDF_ELIXIR_FOREGROUND=5 + # typeset -g POWERLEVEL9K_ASDF_ELIXIR_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_ASDF_ELIXIR_SHOW_ON_UPGLOB='*.foo|*.bar' + + # Postgres version from asdf. + typeset -g POWERLEVEL9K_ASDF_POSTGRES_FOREGROUND=6 + # typeset -g POWERLEVEL9K_ASDF_POSTGRES_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_ASDF_POSTGRES_SHOW_ON_UPGLOB='*.foo|*.bar' + + # PHP version from asdf. + typeset -g POWERLEVEL9K_ASDF_PHP_FOREGROUND=5 + # typeset -g POWERLEVEL9K_ASDF_PHP_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_ASDF_PHP_SHOW_ON_UPGLOB='*.foo|*.bar' + + # Haskell version from asdf. + typeset -g POWERLEVEL9K_ASDF_HASKELL_FOREGROUND=3 + # typeset -g POWERLEVEL9K_ASDF_HASKELL_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_ASDF_HASKELL_SHOW_ON_UPGLOB='*.foo|*.bar' + + # Julia version from asdf. + typeset -g POWERLEVEL9K_ASDF_JULIA_FOREGROUND=2 + # typeset -g POWERLEVEL9K_ASDF_JULIA_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_ASDF_JULIA_SHOW_ON_UPGLOB='*.foo|*.bar' + + ##########[ nordvpn: nordvpn connection status, linux only (https://nordvpn.com/) ]########### + # NordVPN connection indicator color. + typeset -g POWERLEVEL9K_NORDVPN_FOREGROUND=6 + # Hide NordVPN connection indicator when not connected. + typeset -g POWERLEVEL9K_NORDVPN_{DISCONNECTED,CONNECTING,DISCONNECTING}_CONTENT_EXPANSION= + typeset -g POWERLEVEL9K_NORDVPN_{DISCONNECTED,CONNECTING,DISCONNECTING}_VISUAL_IDENTIFIER_EXPANSION= + # Custom icon. + # typeset -g POWERLEVEL9K_NORDVPN_VISUAL_IDENTIFIER_EXPANSION='⭐' + + #################[ ranger: ranger shell (https://github.com/ranger/ranger) ]################## + # Ranger shell color. + typeset -g POWERLEVEL9K_RANGER_FOREGROUND=3 + # Custom icon. + # typeset -g POWERLEVEL9K_RANGER_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ####################[ yazi: yazi shell (https://github.com/sxyazi/yazi) ]##################### + # Yazi shell color. + typeset -g POWERLEVEL9K_YAZI_FOREGROUND=3 + # Custom icon. + # typeset -g POWERLEVEL9K_YAZI_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ######################[ nnn: nnn shell (https://github.com/jarun/nnn) ]####################### + # Nnn shell color. + typeset -g POWERLEVEL9K_NNN_FOREGROUND=3 + # Custom icon. + # typeset -g POWERLEVEL9K_NNN_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ######################[ lf: lf shell (https://github.com/gokcehan/lf) ]####################### + # lf shell color. + typeset -g POWERLEVEL9K_LF_FOREGROUND=3 + # Custom icon. + # typeset -g POWERLEVEL9K_LF_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ##################[ xplr: xplr shell (https://github.com/sayanarijit/xplr) ]################## + # xplr shell color. + typeset -g POWERLEVEL9K_XPLR_FOREGROUND=3 + # Custom icon. + # typeset -g POWERLEVEL9K_XPLR_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ###########################[ vim_shell: vim shell indicator (:sh) ]########################### + # Vim shell indicator color. + typeset -g POWERLEVEL9K_VIM_SHELL_FOREGROUND=3 + # Custom icon. + # typeset -g POWERLEVEL9K_VIM_SHELL_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ######[ midnight_commander: midnight commander shell (https://midnight-commander.org/) ]###### + # Midnight Commander shell color. + typeset -g POWERLEVEL9K_MIDNIGHT_COMMANDER_FOREGROUND=3 + # Custom icon. + # typeset -g POWERLEVEL9K_MIDNIGHT_COMMANDER_VISUAL_IDENTIFIER_EXPANSION='⭐' + + #[ nix_shell: nix shell (https://nixos.org/nixos/nix-pills/developing-with-nix-shell.html) ]## + # Nix shell color. + typeset -g POWERLEVEL9K_NIX_SHELL_FOREGROUND=4 + + # Display the icon of nix_shell if PATH contains a subdirectory of /nix/store. + # typeset -g POWERLEVEL9K_NIX_SHELL_INFER_FROM_PATH=false + + # Tip: If you want to see just the icon without "pure" and "impure", uncomment the next line. + # typeset -g POWERLEVEL9K_NIX_SHELL_CONTENT_EXPANSION= + + # Custom icon. + # typeset -g POWERLEVEL9K_NIX_SHELL_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ##################[ chezmoi_shell: chezmoi shell (https://www.chezmoi.io/) ]################## + # chezmoi shell color. + typeset -g POWERLEVEL9K_CHEZMOI_SHELL_FOREGROUND=4 + # Custom icon. + # typeset -g POWERLEVEL9K_CHEZMOI_SHELL_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ##################################[ disk_usage: disk usage ]################################## + # Colors for different levels of disk usage. + typeset -g POWERLEVEL9K_DISK_USAGE_NORMAL_FOREGROUND=2 + typeset -g POWERLEVEL9K_DISK_USAGE_WARNING_FOREGROUND=3 + typeset -g POWERLEVEL9K_DISK_USAGE_CRITICAL_FOREGROUND=1 + # Thresholds for different levels of disk usage (percentage points). + typeset -g POWERLEVEL9K_DISK_USAGE_WARNING_LEVEL=90 + typeset -g POWERLEVEL9K_DISK_USAGE_CRITICAL_LEVEL=95 + # If set to true, hide disk usage when below $POWERLEVEL9K_DISK_USAGE_WARNING_LEVEL percent. + typeset -g POWERLEVEL9K_DISK_USAGE_ONLY_WARNING=false + # Custom icon. + # typeset -g POWERLEVEL9K_DISK_USAGE_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ######################################[ ram: free RAM ]####################################### + # RAM color. + typeset -g POWERLEVEL9K_RAM_FOREGROUND=2 + # Custom icon. + # typeset -g POWERLEVEL9K_RAM_VISUAL_IDENTIFIER_EXPANSION='⭐' + + #####################################[ swap: used swap ]###################################### + # Swap color. + typeset -g POWERLEVEL9K_SWAP_FOREGROUND=3 + # Custom icon. + # typeset -g POWERLEVEL9K_SWAP_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ######################################[ load: CPU load ]###################################### + # Show average CPU load over this many last minutes. Valid values are 1, 5 and 15. + typeset -g POWERLEVEL9K_LOAD_WHICH=5 + # Load color when load is under 50%. + typeset -g POWERLEVEL9K_LOAD_NORMAL_FOREGROUND=2 + # Load color when load is between 50% and 70%. + typeset -g POWERLEVEL9K_LOAD_WARNING_FOREGROUND=3 + # Load color when load is over 70%. + typeset -g POWERLEVEL9K_LOAD_CRITICAL_FOREGROUND=1 + # Custom icon. + # typeset -g POWERLEVEL9K_LOAD_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ################[ todo: todo items (https://github.com/todotxt/todo.txt-cli) ]################ + # Todo color. + typeset -g POWERLEVEL9K_TODO_FOREGROUND=4 + # Hide todo when the total number of tasks is zero. + typeset -g POWERLEVEL9K_TODO_HIDE_ZERO_TOTAL=true + # Hide todo when the number of tasks after filtering is zero. + typeset -g POWERLEVEL9K_TODO_HIDE_ZERO_FILTERED=false + + # Todo format. The following parameters are available within the expansion. + # + # - P9K_TODO_TOTAL_TASK_COUNT The total number of tasks. + # - P9K_TODO_FILTERED_TASK_COUNT The number of tasks after filtering. + # + # These variables correspond to the last line of the output of `todo.sh -p ls`: + # + # TODO: 24 of 42 tasks shown + # + # Here 24 is P9K_TODO_FILTERED_TASK_COUNT and 42 is P9K_TODO_TOTAL_TASK_COUNT. + # + # typeset -g POWERLEVEL9K_TODO_CONTENT_EXPANSION='$P9K_TODO_FILTERED_TASK_COUNT' + + # Custom icon. + # typeset -g POWERLEVEL9K_TODO_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ###########[ timewarrior: timewarrior tracking status (https://timewarrior.net/) ]############ + # Timewarrior color. + typeset -g POWERLEVEL9K_TIMEWARRIOR_FOREGROUND=4 + # If the tracked task is longer than 24 characters, truncate and append "…". + # Tip: To always display tasks without truncation, delete the following parameter. + # Tip: To hide task names and display just the icon when time tracking is enabled, set the + # value of the following parameter to "". + typeset -g POWERLEVEL9K_TIMEWARRIOR_CONTENT_EXPANSION='${P9K_CONTENT:0:24}${${P9K_CONTENT:24}:+…}' + + # Custom icon. + # typeset -g POWERLEVEL9K_TIMEWARRIOR_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ##############[ taskwarrior: taskwarrior task count (https://taskwarrior.org/) ]############## + # Taskwarrior color. + typeset -g POWERLEVEL9K_TASKWARRIOR_FOREGROUND=6 + + # Taskwarrior segment format. The following parameters are available within the expansion. + # + # - P9K_TASKWARRIOR_PENDING_COUNT The number of pending tasks: `task +PENDING count`. + # - P9K_TASKWARRIOR_OVERDUE_COUNT The number of overdue tasks: `task +OVERDUE count`. + # + # Zero values are represented as empty parameters. + # + # The default format: + # + # '${P9K_TASKWARRIOR_OVERDUE_COUNT:+"!$P9K_TASKWARRIOR_OVERDUE_COUNT/"}$P9K_TASKWARRIOR_PENDING_COUNT' + # + # typeset -g POWERLEVEL9K_TASKWARRIOR_CONTENT_EXPANSION='$P9K_TASKWARRIOR_PENDING_COUNT' + + # Custom icon. + # typeset -g POWERLEVEL9K_TASKWARRIOR_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ######[ per_directory_history: Oh My Zsh per-directory-history local/global indicator ]####### + # Color when using local/global history. + typeset -g POWERLEVEL9K_PER_DIRECTORY_HISTORY_LOCAL_FOREGROUND=5 + typeset -g POWERLEVEL9K_PER_DIRECTORY_HISTORY_GLOBAL_FOREGROUND=3 + + # Tip: Uncomment the next two lines to hide "local"/"global" text and leave just the icon. + # typeset -g POWERLEVEL9K_PER_DIRECTORY_HISTORY_LOCAL_CONTENT_EXPANSION='' + # typeset -g POWERLEVEL9K_PER_DIRECTORY_HISTORY_GLOBAL_CONTENT_EXPANSION='' + + # Custom icon. + # typeset -g POWERLEVEL9K_PER_DIRECTORY_HISTORY_LOCAL_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_PER_DIRECTORY_HISTORY_GLOBAL_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ################################[ cpu_arch: CPU architecture ]################################ + # CPU architecture color. + typeset -g POWERLEVEL9K_CPU_ARCH_FOREGROUND=3 + + # Hide the segment when on a specific CPU architecture. + # typeset -g POWERLEVEL9K_CPU_ARCH_X86_64_CONTENT_EXPANSION= + # typeset -g POWERLEVEL9K_CPU_ARCH_X86_64_VISUAL_IDENTIFIER_EXPANSION= + + # Custom icon. + # typeset -g POWERLEVEL9K_CPU_ARCH_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ##################################[ context: user@hostname ]################################## + # Context color when running with privileges. + typeset -g POWERLEVEL9K_CONTEXT_ROOT_FOREGROUND=1 + # Context color in SSH without privileges. + typeset -g POWERLEVEL9K_CONTEXT_{REMOTE,REMOTE_SUDO}_FOREGROUND=7 + # Default context color (no privileges, no SSH). + typeset -g POWERLEVEL9K_CONTEXT_FOREGROUND=7 + + # Context format when running with privileges: bold user@hostname. + typeset -g POWERLEVEL9K_CONTEXT_ROOT_TEMPLATE='%B%n@%m' + # Context format when in SSH without privileges: user@hostname. + typeset -g POWERLEVEL9K_CONTEXT_{REMOTE,REMOTE_SUDO}_TEMPLATE='%n@%m' + # Default context format (no privileges, no SSH): user@hostname. + typeset -g POWERLEVEL9K_CONTEXT_TEMPLATE='%n@%m' + + # Don't show context unless running with privileges or in SSH. + # Tip: Remove the next line to always show context. + typeset -g POWERLEVEL9K_CONTEXT_{DEFAULT,SUDO}_{CONTENT,VISUAL_IDENTIFIER}_EXPANSION= + + # Custom icon. + # typeset -g POWERLEVEL9K_CONTEXT_VISUAL_IDENTIFIER_EXPANSION='⭐' + # Custom prefix. + # typeset -g POWERLEVEL9K_CONTEXT_PREFIX='%fwith ' + + ###[ virtualenv: python virtual environment (https://docs.python.org/3/library/venv.html) ]### + # Python virtual environment color. + typeset -g POWERLEVEL9K_VIRTUALENV_FOREGROUND=6 + # Don't show Python version next to the virtual environment name. + typeset -g POWERLEVEL9K_VIRTUALENV_SHOW_PYTHON_VERSION=false + # If set to "false", won't show virtualenv if pyenv is already shown. + # If set to "if-different", won't show virtualenv if it's the same as pyenv. + typeset -g POWERLEVEL9K_VIRTUALENV_SHOW_WITH_PYENV=false + # Separate environment name from Python version only with a space. + typeset -g POWERLEVEL9K_VIRTUALENV_{LEFT,RIGHT}_DELIMITER= + # Custom icon. + # typeset -g POWERLEVEL9K_VIRTUALENV_VISUAL_IDENTIFIER_EXPANSION='⭐' + + #####################[ anaconda: conda environment (https://conda.io/) ]###################### + # Anaconda environment color. + typeset -g POWERLEVEL9K_ANACONDA_FOREGROUND=6 + + # Anaconda segment format. The following parameters are available within the expansion. + # + # - CONDA_PREFIX Absolute path to the active Anaconda/Miniconda environment. + # - CONDA_DEFAULT_ENV Name of the active Anaconda/Miniconda environment. + # - CONDA_PROMPT_MODIFIER Configurable prompt modifier (see below). + # - P9K_ANACONDA_PYTHON_VERSION Current python version (python --version). + # + # CONDA_PROMPT_MODIFIER can be configured with the following command: + # + # conda config --set env_prompt '({default_env}) ' + # + # The last argument is a Python format string that can use the following variables: + # + # - prefix The same as CONDA_PREFIX. + # - default_env The same as CONDA_DEFAULT_ENV. + # - name The last segment of CONDA_PREFIX. + # - stacked_env Comma-separated list of names in the environment stack. The first element is + # always the same as default_env. + # + # Note: '({default_env}) ' is the default value of env_prompt. + # + # The default value of POWERLEVEL9K_ANACONDA_CONTENT_EXPANSION expands to $CONDA_PROMPT_MODIFIER + # without the surrounding parentheses, or to the last path component of CONDA_PREFIX if the former + # is empty. + typeset -g POWERLEVEL9K_ANACONDA_CONTENT_EXPANSION='${${${${CONDA_PROMPT_MODIFIER#\(}% }%\)}:-${CONDA_PREFIX:t}}' + + # Custom icon. + # typeset -g POWERLEVEL9K_ANACONDA_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ################[ pyenv: python environment (https://github.com/pyenv/pyenv) ]################ + # Pyenv color. + typeset -g POWERLEVEL9K_PYENV_FOREGROUND=6 + # Hide python version if it doesn't come from one of these sources. + typeset -g POWERLEVEL9K_PYENV_SOURCES=(shell local global) + # If set to false, hide python version if it's the same as global: + # $(pyenv version-name) == $(pyenv global). + typeset -g POWERLEVEL9K_PYENV_PROMPT_ALWAYS_SHOW=false + # If set to false, hide python version if it's equal to "system". + typeset -g POWERLEVEL9K_PYENV_SHOW_SYSTEM=true + + # Pyenv segment format. The following parameters are available within the expansion. + # + # - P9K_CONTENT Current pyenv environment (pyenv version-name). + # - P9K_PYENV_PYTHON_VERSION Current python version (python --version). + # + # The default format has the following logic: + # + # 1. Display just "$P9K_CONTENT" if it's equal to "$P9K_PYENV_PYTHON_VERSION" or + # starts with "$P9K_PYENV_PYTHON_VERSION/". + # 2. Otherwise display "$P9K_CONTENT $P9K_PYENV_PYTHON_VERSION". + typeset -g POWERLEVEL9K_PYENV_CONTENT_EXPANSION='${P9K_CONTENT}${${P9K_CONTENT:#$P9K_PYENV_PYTHON_VERSION(|/*)}:+ $P9K_PYENV_PYTHON_VERSION}' + + # Custom icon. + # typeset -g POWERLEVEL9K_PYENV_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ################[ goenv: go environment (https://github.com/syndbg/goenv) ]################ + # Goenv color. + typeset -g POWERLEVEL9K_GOENV_FOREGROUND=6 + # Hide go version if it doesn't come from one of these sources. + typeset -g POWERLEVEL9K_GOENV_SOURCES=(shell local global) + # If set to false, hide go version if it's the same as global: + # $(goenv version-name) == $(goenv global). + typeset -g POWERLEVEL9K_GOENV_PROMPT_ALWAYS_SHOW=false + # If set to false, hide go version if it's equal to "system". + typeset -g POWERLEVEL9K_GOENV_SHOW_SYSTEM=true + # Custom icon. + # typeset -g POWERLEVEL9K_GOENV_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ##########[ nodenv: node.js version from nodenv (https://github.com/nodenv/nodenv) ]########## + # Nodenv color. + typeset -g POWERLEVEL9K_NODENV_FOREGROUND=2 + # Hide node version if it doesn't come from one of these sources. + typeset -g POWERLEVEL9K_NODENV_SOURCES=(shell local global) + # If set to false, hide node version if it's the same as global: + # $(nodenv version-name) == $(nodenv global). + typeset -g POWERLEVEL9K_NODENV_PROMPT_ALWAYS_SHOW=false + # If set to false, hide node version if it's equal to "system". + typeset -g POWERLEVEL9K_NODENV_SHOW_SYSTEM=true + # Custom icon. + # typeset -g POWERLEVEL9K_NODENV_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ##############[ nvm: node.js version from nvm (https://github.com/nvm-sh/nvm) ]############### + # Nvm color. + typeset -g POWERLEVEL9K_NVM_FOREGROUND=2 + # If set to false, hide node version if it's the same as default: + # $(nvm version current) == $(nvm version default). + typeset -g POWERLEVEL9K_NVM_PROMPT_ALWAYS_SHOW=false + # If set to false, hide node version if it's equal to "system". + typeset -g POWERLEVEL9K_NVM_SHOW_SYSTEM=true + # Custom icon. + # typeset -g POWERLEVEL9K_NVM_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ############[ nodeenv: node.js environment (https://github.com/ekalinin/nodeenv) ]############ + # Nodeenv color. + typeset -g POWERLEVEL9K_NODEENV_FOREGROUND=2 + # Don't show Node version next to the environment name. + typeset -g POWERLEVEL9K_NODEENV_SHOW_NODE_VERSION=false + # Separate environment name from Node version only with a space. + typeset -g POWERLEVEL9K_NODEENV_{LEFT,RIGHT}_DELIMITER= + # Custom icon. + # typeset -g POWERLEVEL9K_NODEENV_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ##############################[ node_version: node.js version ]############################### + # Node version color. + typeset -g POWERLEVEL9K_NODE_VERSION_FOREGROUND=2 + # Show node version only when in a directory tree containing package.json. + typeset -g POWERLEVEL9K_NODE_VERSION_PROJECT_ONLY=true + # Custom icon. + # typeset -g POWERLEVEL9K_NODE_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐' + + #######################[ go_version: go version (https://golang.org) ]######################## + # Go version color. + typeset -g POWERLEVEL9K_GO_VERSION_FOREGROUND=6 + # Show go version only when in a go project subdirectory. + typeset -g POWERLEVEL9K_GO_VERSION_PROJECT_ONLY=true + # Custom icon. + # typeset -g POWERLEVEL9K_GO_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐' + + #################[ rust_version: rustc version (https://www.rust-lang.org) ]################## + # Rust version color. + typeset -g POWERLEVEL9K_RUST_VERSION_FOREGROUND=4 + # Show rust version only when in a rust project subdirectory. + typeset -g POWERLEVEL9K_RUST_VERSION_PROJECT_ONLY=true + # Custom icon. + # typeset -g POWERLEVEL9K_RUST_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ###############[ dotnet_version: .NET version (https://dotnet.microsoft.com) ]################ + # .NET version color. + typeset -g POWERLEVEL9K_DOTNET_VERSION_FOREGROUND=5 + # Show .NET version only when in a .NET project subdirectory. + typeset -g POWERLEVEL9K_DOTNET_VERSION_PROJECT_ONLY=true + # Custom icon. + # typeset -g POWERLEVEL9K_DOTNET_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐' + + #####################[ php_version: php version (https://www.php.net/) ]###################### + # PHP version color. + typeset -g POWERLEVEL9K_PHP_VERSION_FOREGROUND=5 + # Show PHP version only when in a PHP project subdirectory. + typeset -g POWERLEVEL9K_PHP_VERSION_PROJECT_ONLY=true + # Custom icon. + # typeset -g POWERLEVEL9K_PHP_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ##########[ laravel_version: laravel php framework version (https://laravel.com/) ]########### + # Laravel version color. + typeset -g POWERLEVEL9K_LARAVEL_VERSION_FOREGROUND=1 + # Custom icon. + # typeset -g POWERLEVEL9K_LARAVEL_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ####################[ java_version: java version (https://www.java.com/) ]#################### + # Java version color. + typeset -g POWERLEVEL9K_JAVA_VERSION_FOREGROUND=4 + # Show java version only when in a java project subdirectory. + typeset -g POWERLEVEL9K_JAVA_VERSION_PROJECT_ONLY=true + # Show brief version. + typeset -g POWERLEVEL9K_JAVA_VERSION_FULL=false + # Custom icon. + # typeset -g POWERLEVEL9K_JAVA_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ###[ package: name@version from package.json (https://docs.npmjs.com/files/package.json) ]#### + # Package color. + typeset -g POWERLEVEL9K_PACKAGE_FOREGROUND=6 + # Package format. The following parameters are available within the expansion. + # + # - P9K_PACKAGE_NAME The value of `name` field in package.json. + # - P9K_PACKAGE_VERSION The value of `version` field in package.json. + # + # typeset -g POWERLEVEL9K_PACKAGE_CONTENT_EXPANSION='${P9K_PACKAGE_NAME//\%/%%}@${P9K_PACKAGE_VERSION//\%/%%}' + # Custom icon. + # typeset -g POWERLEVEL9K_PACKAGE_VISUAL_IDENTIFIER_EXPANSION='⭐' + + #############[ rbenv: ruby version from rbenv (https://github.com/rbenv/rbenv) ]############## + # Rbenv color. + typeset -g POWERLEVEL9K_RBENV_FOREGROUND=1 + # Hide ruby version if it doesn't come from one of these sources. + typeset -g POWERLEVEL9K_RBENV_SOURCES=(shell local global) + # If set to false, hide ruby version if it's the same as global: + # $(rbenv version-name) == $(rbenv global). + typeset -g POWERLEVEL9K_RBENV_PROMPT_ALWAYS_SHOW=false + # If set to false, hide ruby version if it's equal to "system". + typeset -g POWERLEVEL9K_RBENV_SHOW_SYSTEM=true + # Custom icon. + # typeset -g POWERLEVEL9K_RBENV_VISUAL_IDENTIFIER_EXPANSION='⭐' + + #######################[ rvm: ruby version from rvm (https://rvm.io) ]######################## + # Rvm color. + typeset -g POWERLEVEL9K_RVM_FOREGROUND=1 + # Don't show @gemset at the end. + typeset -g POWERLEVEL9K_RVM_SHOW_GEMSET=false + # Don't show ruby- at the front. + typeset -g POWERLEVEL9K_RVM_SHOW_PREFIX=false + # Custom icon. + # typeset -g POWERLEVEL9K_RVM_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ###########[ fvm: flutter version management (https://github.com/leoafarias/fvm) ]############ + # Fvm color. + typeset -g POWERLEVEL9K_FVM_FOREGROUND=4 + # Custom icon. + # typeset -g POWERLEVEL9K_FVM_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ##########[ luaenv: lua version from luaenv (https://github.com/cehoffman/luaenv) ]########### + # Lua color. + typeset -g POWERLEVEL9K_LUAENV_FOREGROUND=4 + # Hide lua version if it doesn't come from one of these sources. + typeset -g POWERLEVEL9K_LUAENV_SOURCES=(shell local global) + # If set to false, hide lua version if it's the same as global: + # $(luaenv version-name) == $(luaenv global). + typeset -g POWERLEVEL9K_LUAENV_PROMPT_ALWAYS_SHOW=false + # If set to false, hide lua version if it's equal to "system". + typeset -g POWERLEVEL9K_LUAENV_SHOW_SYSTEM=true + # Custom icon. + # typeset -g POWERLEVEL9K_LUAENV_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ###############[ jenv: java version from jenv (https://github.com/jenv/jenv) ]################ + # Java color. + typeset -g POWERLEVEL9K_JENV_FOREGROUND=4 + # Hide java version if it doesn't come from one of these sources. + typeset -g POWERLEVEL9K_JENV_SOURCES=(shell local global) + # If set to false, hide java version if it's the same as global: + # $(jenv version-name) == $(jenv global). + typeset -g POWERLEVEL9K_JENV_PROMPT_ALWAYS_SHOW=false + # If set to false, hide java version if it's equal to "system". + typeset -g POWERLEVEL9K_JENV_SHOW_SYSTEM=true + # Custom icon. + # typeset -g POWERLEVEL9K_JENV_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ###########[ plenv: perl version from plenv (https://github.com/tokuhirom/plenv) ]############ + # Perl color. + typeset -g POWERLEVEL9K_PLENV_FOREGROUND=6 + # Hide perl version if it doesn't come from one of these sources. + typeset -g POWERLEVEL9K_PLENV_SOURCES=(shell local global) + # If set to false, hide perl version if it's the same as global: + # $(plenv version-name) == $(plenv global). + typeset -g POWERLEVEL9K_PLENV_PROMPT_ALWAYS_SHOW=false + # If set to false, hide perl version if it's equal to "system". + typeset -g POWERLEVEL9K_PLENV_SHOW_SYSTEM=true + # Custom icon. + # typeset -g POWERLEVEL9K_PLENV_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ###########[ perlbrew: perl version from perlbrew (https://github.com/gugod/App-perlbrew) ]############ + # Perlbrew color. + typeset -g POWERLEVEL9K_PERLBREW_FOREGROUND=67 + # Show perlbrew version only when in a perl project subdirectory. + typeset -g POWERLEVEL9K_PERLBREW_PROJECT_ONLY=true + # Don't show "perl-" at the front. + typeset -g POWERLEVEL9K_PERLBREW_SHOW_PREFIX=false + # Custom icon. + # typeset -g POWERLEVEL9K_PERLBREW_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ############[ phpenv: php version from phpenv (https://github.com/phpenv/phpenv) ]############ + # PHP color. + typeset -g POWERLEVEL9K_PHPENV_FOREGROUND=5 + # Hide php version if it doesn't come from one of these sources. + typeset -g POWERLEVEL9K_PHPENV_SOURCES=(shell local global) + # If set to false, hide php version if it's the same as global: + # $(phpenv version-name) == $(phpenv global). + typeset -g POWERLEVEL9K_PHPENV_PROMPT_ALWAYS_SHOW=false + # If set to false, hide php version if it's equal to "system". + typeset -g POWERLEVEL9K_PHPENV_SHOW_SYSTEM=true + # Custom icon. + # typeset -g POWERLEVEL9K_PHPENV_VISUAL_IDENTIFIER_EXPANSION='⭐' + + #######[ scalaenv: scala version from scalaenv (https://github.com/scalaenv/scalaenv) ]####### + # Scala color. + typeset -g POWERLEVEL9K_SCALAENV_FOREGROUND=1 + # Hide scala version if it doesn't come from one of these sources. + typeset -g POWERLEVEL9K_SCALAENV_SOURCES=(shell local global) + # If set to false, hide scala version if it's the same as global: + # $(scalaenv version-name) == $(scalaenv global). + typeset -g POWERLEVEL9K_SCALAENV_PROMPT_ALWAYS_SHOW=false + # If set to false, hide scala version if it's equal to "system". + typeset -g POWERLEVEL9K_SCALAENV_SHOW_SYSTEM=true + # Custom icon. + # typeset -g POWERLEVEL9K_SCALAENV_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ##########[ haskell_stack: haskell version from stack (https://haskellstack.org/) ]########### + # Haskell color. + typeset -g POWERLEVEL9K_HASKELL_STACK_FOREGROUND=3 + # Hide haskell version if it doesn't come from one of these sources. + # + # shell: version is set by STACK_YAML + # local: version is set by stack.yaml up the directory tree + # global: version is set by the implicit global project (~/.stack/global-project/stack.yaml) + typeset -g POWERLEVEL9K_HASKELL_STACK_SOURCES=(shell local) + # If set to false, hide haskell version if it's the same as in the implicit global project. + typeset -g POWERLEVEL9K_HASKELL_STACK_ALWAYS_SHOW=true + # Custom icon. + # typeset -g POWERLEVEL9K_HASKELL_STACK_VISUAL_IDENTIFIER_EXPANSION='⭐' + + #############[ kubecontext: current kubernetes context (https://kubernetes.io/) ]############# + # Show kubecontext only when the command you are typing invokes one of these tools. + # Tip: Remove the next line to always show kubecontext. + typeset -g POWERLEVEL9K_KUBECONTEXT_SHOW_ON_COMMAND='kubectl|helm|kubens|kubectx|oc|istioctl|kogito|k9s|helmfile|flux|fluxctl|stern|kubeseal|skaffold|kubent|kubecolor|cmctl|sparkctl' + + # Kubernetes context classes for the purpose of using different colors, icons and expansions with + # different contexts. + # + # POWERLEVEL9K_KUBECONTEXT_CLASSES is an array with even number of elements. The first element + # in each pair defines a pattern against which the current kubernetes context gets matched. + # More specifically, it's P9K_CONTENT prior to the application of context expansion (see below) + # that gets matched. If you unset all POWERLEVEL9K_KUBECONTEXT_*CONTENT_EXPANSION parameters, + # you'll see this value in your prompt. The second element of each pair in + # POWERLEVEL9K_KUBECONTEXT_CLASSES defines the context class. Patterns are tried in order. The + # first match wins. + # + # For example, given these settings: + # + # typeset -g POWERLEVEL9K_KUBECONTEXT_CLASSES=( + # '*prod*' PROD + # '*test*' TEST + # '*' DEFAULT) + # + # If your current kubernetes context is "deathray-testing/default", its class is TEST + # because "deathray-testing/default" doesn't match the pattern '*prod*' but does match '*test*'. + # + # You can define different colors, icons and content expansions for different classes: + # + # typeset -g POWERLEVEL9K_KUBECONTEXT_TEST_FOREGROUND=3 + # typeset -g POWERLEVEL9K_KUBECONTEXT_TEST_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_KUBECONTEXT_TEST_CONTENT_EXPANSION='> ${P9K_CONTENT} <' + typeset -g POWERLEVEL9K_KUBECONTEXT_CLASSES=( + # '*prod*' PROD # These values are examples that are unlikely + # '*test*' TEST # to match your needs. Customize them as needed. + '*' DEFAULT) + typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_FOREGROUND=5 + # typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_VISUAL_IDENTIFIER_EXPANSION='⭐' + + # Use POWERLEVEL9K_KUBECONTEXT_CONTENT_EXPANSION to specify the content displayed by kubecontext + # segment. Parameter expansions are very flexible and fast, too. See reference: + # http://zsh.sourceforge.net/Doc/Release/Expansion.html#Parameter-Expansion. + # + # Within the expansion the following parameters are always available: + # + # - P9K_CONTENT The content that would've been displayed if there was no content + # expansion defined. + # - P9K_KUBECONTEXT_NAME The current context's name. Corresponds to column NAME in the + # output of `kubectl config get-contexts`. + # - P9K_KUBECONTEXT_CLUSTER The current context's cluster. Corresponds to column CLUSTER in the + # output of `kubectl config get-contexts`. + # - P9K_KUBECONTEXT_NAMESPACE The current context's namespace. Corresponds to column NAMESPACE + # in the output of `kubectl config get-contexts`. If there is no + # namespace, the parameter is set to "default". + # - P9K_KUBECONTEXT_USER The current context's user. Corresponds to column AUTHINFO in the + # output of `kubectl config get-contexts`. + # + # If the context points to Google Kubernetes Engine (GKE) or Elastic Kubernetes Service (EKS), + # the following extra parameters are available: + # + # - P9K_KUBECONTEXT_CLOUD_NAME Either "gke" or "eks". + # - P9K_KUBECONTEXT_CLOUD_ACCOUNT Account/project ID. + # - P9K_KUBECONTEXT_CLOUD_ZONE Availability zone. + # - P9K_KUBECONTEXT_CLOUD_CLUSTER Cluster. + # + # P9K_KUBECONTEXT_CLOUD_* parameters are derived from P9K_KUBECONTEXT_CLUSTER. For example, + # if P9K_KUBECONTEXT_CLUSTER is "gke_my-account_us-east1-a_my-cluster-01": + # + # - P9K_KUBECONTEXT_CLOUD_NAME=gke + # - P9K_KUBECONTEXT_CLOUD_ACCOUNT=my-account + # - P9K_KUBECONTEXT_CLOUD_ZONE=us-east1-a + # - P9K_KUBECONTEXT_CLOUD_CLUSTER=my-cluster-01 + # + # If P9K_KUBECONTEXT_CLUSTER is "arn:aws:eks:us-east-1:123456789012:cluster/my-cluster-01": + # + # - P9K_KUBECONTEXT_CLOUD_NAME=eks + # - P9K_KUBECONTEXT_CLOUD_ACCOUNT=123456789012 + # - P9K_KUBECONTEXT_CLOUD_ZONE=us-east-1 + # - P9K_KUBECONTEXT_CLOUD_CLUSTER=my-cluster-01 + typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_CONTENT_EXPANSION= + # Show P9K_KUBECONTEXT_CLOUD_CLUSTER if it's not empty and fall back to P9K_KUBECONTEXT_NAME. + POWERLEVEL9K_KUBECONTEXT_DEFAULT_CONTENT_EXPANSION+='${P9K_KUBECONTEXT_CLOUD_CLUSTER:-${P9K_KUBECONTEXT_NAME}}' + # Append the current context's namespace if it's not "default". + POWERLEVEL9K_KUBECONTEXT_DEFAULT_CONTENT_EXPANSION+='${${:-/$P9K_KUBECONTEXT_NAMESPACE}:#/default}' + + # Custom prefix. + # typeset -g POWERLEVEL9K_KUBECONTEXT_PREFIX='%fat ' + + ################[ terraform: terraform workspace (https://www.terraform.io) ]################# + # Don't show terraform workspace if it's literally "default". + typeset -g POWERLEVEL9K_TERRAFORM_SHOW_DEFAULT=false + # POWERLEVEL9K_TERRAFORM_CLASSES is an array with even number of elements. The first element + # in each pair defines a pattern against which the current terraform workspace gets matched. + # More specifically, it's P9K_CONTENT prior to the application of context expansion (see below) + # that gets matched. If you unset all POWERLEVEL9K_TERRAFORM_*CONTENT_EXPANSION parameters, + # you'll see this value in your prompt. The second element of each pair in + # POWERLEVEL9K_TERRAFORM_CLASSES defines the workspace class. Patterns are tried in order. The + # first match wins. + # + # For example, given these settings: + # + # typeset -g POWERLEVEL9K_TERRAFORM_CLASSES=( + # '*prod*' PROD + # '*test*' TEST + # '*' OTHER) + # + # If your current terraform workspace is "project_test", its class is TEST because "project_test" + # doesn't match the pattern '*prod*' but does match '*test*'. + # + # You can define different colors, icons and content expansions for different classes: + # + # typeset -g POWERLEVEL9K_TERRAFORM_TEST_FOREGROUND=2 + # typeset -g POWERLEVEL9K_TERRAFORM_TEST_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_TERRAFORM_TEST_CONTENT_EXPANSION='> ${P9K_CONTENT} <' + typeset -g POWERLEVEL9K_TERRAFORM_CLASSES=( + # '*prod*' PROD # These values are examples that are unlikely + # '*test*' TEST # to match your needs. Customize them as needed. + '*' OTHER) + typeset -g POWERLEVEL9K_TERRAFORM_OTHER_FOREGROUND=4 + # typeset -g POWERLEVEL9K_TERRAFORM_OTHER_VISUAL_IDENTIFIER_EXPANSION='⭐' + + #############[ terraform_version: terraform version (https://www.terraform.io) ]############## + # Terraform version color. + typeset -g POWERLEVEL9K_TERRAFORM_VERSION_FOREGROUND=4 + # Custom icon. + # typeset -g POWERLEVEL9K_TERRAFORM_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐' + + #[ aws: aws profile (https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-profiles.html) ]# + # Show aws only when the command you are typing invokes one of these tools. + # Tip: Remove the next line to always show aws. + typeset -g POWERLEVEL9K_AWS_SHOW_ON_COMMAND='aws|awless|cdk|terraform|pulumi|terragrunt' + + # POWERLEVEL9K_AWS_CLASSES is an array with even number of elements. The first element + # in each pair defines a pattern against which the current AWS profile gets matched. + # More specifically, it's P9K_CONTENT prior to the application of context expansion (see below) + # that gets matched. If you unset all POWERLEVEL9K_AWS_*CONTENT_EXPANSION parameters, + # you'll see this value in your prompt. The second element of each pair in + # POWERLEVEL9K_AWS_CLASSES defines the profile class. Patterns are tried in order. The + # first match wins. + # + # For example, given these settings: + # + # typeset -g POWERLEVEL9K_AWS_CLASSES=( + # '*prod*' PROD + # '*test*' TEST + # '*' DEFAULT) + # + # If your current AWS profile is "company_test", its class is TEST + # because "company_test" doesn't match the pattern '*prod*' but does match '*test*'. + # + # You can define different colors, icons and content expansions for different classes: + # + # typeset -g POWERLEVEL9K_AWS_TEST_FOREGROUND=2 + # typeset -g POWERLEVEL9K_AWS_TEST_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_AWS_TEST_CONTENT_EXPANSION='> ${P9K_CONTENT} <' + typeset -g POWERLEVEL9K_AWS_CLASSES=( + # '*prod*' PROD # These values are examples that are unlikely + # '*test*' TEST # to match your needs. Customize them as needed. + '*' DEFAULT) + typeset -g POWERLEVEL9K_AWS_DEFAULT_FOREGROUND=3 + # typeset -g POWERLEVEL9K_AWS_DEFAULT_VISUAL_IDENTIFIER_EXPANSION='⭐' + + # AWS segment format. The following parameters are available within the expansion. + # + # - P9K_AWS_PROFILE The name of the current AWS profile. + # - P9K_AWS_REGION The region associated with the current AWS profile. + typeset -g POWERLEVEL9K_AWS_CONTENT_EXPANSION='${P9K_AWS_PROFILE//\%/%%}${P9K_AWS_REGION:+ ${P9K_AWS_REGION//\%/%%}}' + + #[ aws_eb_env: aws elastic beanstalk environment (https://aws.amazon.com/elasticbeanstalk/) ]# + # AWS Elastic Beanstalk environment color. + typeset -g POWERLEVEL9K_AWS_EB_ENV_FOREGROUND=2 + # Custom icon. + # typeset -g POWERLEVEL9K_AWS_EB_ENV_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ##########[ azure: azure account name (https://docs.microsoft.com/en-us/cli/azure) ]########## + # Show azure only when the command you are typing invokes one of these tools. + # Tip: Remove the next line to always show azure. + typeset -g POWERLEVEL9K_AZURE_SHOW_ON_COMMAND='az|terraform|pulumi|terragrunt' + + # POWERLEVEL9K_AZURE_CLASSES is an array with even number of elements. The first element + # in each pair defines a pattern against which the current azure account name gets matched. + # More specifically, it's P9K_CONTENT prior to the application of context expansion (see below) + # that gets matched. If you unset all POWERLEVEL9K_AZURE_*CONTENT_EXPANSION parameters, + # you'll see this value in your prompt. The second element of each pair in + # POWERLEVEL9K_AZURE_CLASSES defines the account class. Patterns are tried in order. The + # first match wins. + # + # For example, given these settings: + # + # typeset -g POWERLEVEL9K_AZURE_CLASSES=( + # '*prod*' PROD + # '*test*' TEST + # '*' OTHER) + # + # If your current azure account is "company_test", its class is TEST because "company_test" + # doesn't match the pattern '*prod*' but does match '*test*'. + # + # You can define different colors, icons and content expansions for different classes: + # + # typeset -g POWERLEVEL9K_AZURE_TEST_FOREGROUND=2 + # typeset -g POWERLEVEL9K_AZURE_TEST_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_AZURE_TEST_CONTENT_EXPANSION='> ${P9K_CONTENT} <' + typeset -g POWERLEVEL9K_AZURE_CLASSES=( + # '*prod*' PROD # These values are examples that are unlikely + # '*test*' TEST # to match your needs. Customize them as needed. + '*' OTHER) + + # Azure account name color. + typeset -g POWERLEVEL9K_AZURE_OTHER_FOREGROUND=4 + # Custom icon. + # typeset -g POWERLEVEL9K_AZURE_OTHER_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ##########[ gcloud: google cloud account and project (https://cloud.google.com/) ]########### + # Show gcloud only when the command you are typing invokes one of these tools. + # Tip: Remove the next line to always show gcloud. + typeset -g POWERLEVEL9K_GCLOUD_SHOW_ON_COMMAND='gcloud|gcs|gsutil' + # Google cloud color. + typeset -g POWERLEVEL9K_GCLOUD_FOREGROUND=4 + + # Google cloud format. Change the value of POWERLEVEL9K_GCLOUD_PARTIAL_CONTENT_EXPANSION and/or + # POWERLEVEL9K_GCLOUD_COMPLETE_CONTENT_EXPANSION if the default is too verbose or not informative + # enough. You can use the following parameters in the expansions. Each of them corresponds to the + # output of `gcloud` tool. + # + # Parameter | Source + # -------------------------|-------------------------------------------------------------------- + # P9K_GCLOUD_CONFIGURATION | gcloud config configurations list --format='value(name)' + # P9K_GCLOUD_ACCOUNT | gcloud config get-value account + # P9K_GCLOUD_PROJECT_ID | gcloud config get-value project + # P9K_GCLOUD_PROJECT_NAME | gcloud projects describe $P9K_GCLOUD_PROJECT_ID --format='value(name)' + # + # Note: ${VARIABLE//\%/%%} expands to ${VARIABLE} with all occurrences of '%' replaced with '%%'. + # + # Obtaining project name requires sending a request to Google servers. This can take a long time + # and even fail. When project name is unknown, P9K_GCLOUD_PROJECT_NAME is not set and gcloud + # prompt segment is in state PARTIAL. When project name gets known, P9K_GCLOUD_PROJECT_NAME gets + # set and gcloud prompt segment transitions to state COMPLETE. + # + # You can customize the format, icon and colors of gcloud segment separately for states PARTIAL + # and COMPLETE. You can also hide gcloud in state PARTIAL by setting + # POWERLEVEL9K_GCLOUD_PARTIAL_VISUAL_IDENTIFIER_EXPANSION and + # POWERLEVEL9K_GCLOUD_PARTIAL_CONTENT_EXPANSION to empty. + typeset -g POWERLEVEL9K_GCLOUD_PARTIAL_CONTENT_EXPANSION='${P9K_GCLOUD_PROJECT_ID//\%/%%}' + typeset -g POWERLEVEL9K_GCLOUD_COMPLETE_CONTENT_EXPANSION='${P9K_GCLOUD_PROJECT_NAME//\%/%%}' + + # Send a request to Google (by means of `gcloud projects describe ...`) to obtain project name + # this often. Negative value disables periodic polling. In this mode project name is retrieved + # only when the current configuration, account or project id changes. + typeset -g POWERLEVEL9K_GCLOUD_REFRESH_PROJECT_NAME_SECONDS=60 + + # Custom icon. + # typeset -g POWERLEVEL9K_GCLOUD_VISUAL_IDENTIFIER_EXPANSION='⭐' + + #[ google_app_cred: google application credentials (https://cloud.google.com/docs/authentication/production) ]# + # Show google_app_cred only when the command you are typing invokes one of these tools. + # Tip: Remove the next line to always show google_app_cred. + typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_SHOW_ON_COMMAND='terraform|pulumi|terragrunt' + + # Google application credentials classes for the purpose of using different colors, icons and + # expansions with different credentials. + # + # POWERLEVEL9K_GOOGLE_APP_CRED_CLASSES is an array with even number of elements. The first + # element in each pair defines a pattern against which the current kubernetes context gets + # matched. More specifically, it's P9K_CONTENT prior to the application of context expansion + # (see below) that gets matched. If you unset all POWERLEVEL9K_GOOGLE_APP_CRED_*CONTENT_EXPANSION + # parameters, you'll see this value in your prompt. The second element of each pair in + # POWERLEVEL9K_GOOGLE_APP_CRED_CLASSES defines the context class. Patterns are tried in order. + # The first match wins. + # + # For example, given these settings: + # + # typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_CLASSES=( + # '*:*prod*:*' PROD + # '*:*test*:*' TEST + # '*' DEFAULT) + # + # If your current Google application credentials is "service_account deathray-testing x@y.com", + # its class is TEST because it doesn't match the pattern '* *prod* *' but does match '* *test* *'. + # + # You can define different colors, icons and content expansions for different classes: + # + # typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_TEST_FOREGROUND=3 + # typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_TEST_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_TEST_CONTENT_EXPANSION='$P9K_GOOGLE_APP_CRED_PROJECT_ID' + typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_CLASSES=( + # '*:*prod*:*' PROD # These values are examples that are unlikely + # '*:*test*:*' TEST # to match your needs. Customize them as needed. + '*' DEFAULT) + typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_DEFAULT_FOREGROUND=5 + # typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_DEFAULT_VISUAL_IDENTIFIER_EXPANSION='⭐' + + # Use POWERLEVEL9K_GOOGLE_APP_CRED_CONTENT_EXPANSION to specify the content displayed by + # google_app_cred segment. Parameter expansions are very flexible and fast, too. See reference: + # http://zsh.sourceforge.net/Doc/Release/Expansion.html#Parameter-Expansion. + # + # You can use the following parameters in the expansion. Each of them corresponds to one of the + # fields in the JSON file pointed to by GOOGLE_APPLICATION_CREDENTIALS. + # + # Parameter | JSON key file field + # ---------------------------------+--------------- + # P9K_GOOGLE_APP_CRED_TYPE | type + # P9K_GOOGLE_APP_CRED_PROJECT_ID | project_id + # P9K_GOOGLE_APP_CRED_CLIENT_EMAIL | client_email + # + # Note: ${VARIABLE//\%/%%} expands to ${VARIABLE} with all occurrences of '%' replaced by '%%'. + typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_DEFAULT_CONTENT_EXPANSION='${P9K_GOOGLE_APP_CRED_PROJECT_ID//\%/%%}' + + ##############[ toolbox: toolbox name (https://github.com/containers/toolbox) ]############### + # Toolbox color. + typeset -g POWERLEVEL9K_TOOLBOX_FOREGROUND=3 + # Don't display the name of the toolbox if it matches fedora-toolbox-*. + typeset -g POWERLEVEL9K_TOOLBOX_CONTENT_EXPANSION='${P9K_TOOLBOX_NAME:#fedora-toolbox-*}' + # Custom icon. + # typeset -g POWERLEVEL9K_TOOLBOX_VISUAL_IDENTIFIER_EXPANSION='⭐' + # Custom prefix. + # typeset -g POWERLEVEL9K_TOOLBOX_PREFIX='%fin ' + + ###############################[ public_ip: public IP address ]############################### + # Public IP color. + typeset -g POWERLEVEL9K_PUBLIC_IP_FOREGROUND=6 + # Custom icon. + # typeset -g POWERLEVEL9K_PUBLIC_IP_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ########################[ vpn_ip: virtual private network indicator ]######################### + # VPN IP color. + typeset -g POWERLEVEL9K_VPN_IP_FOREGROUND=3 + # When on VPN, show just an icon without the IP address. + # Tip: To display the private IP address when on VPN, remove the next line. + typeset -g POWERLEVEL9K_VPN_IP_CONTENT_EXPANSION= + # Regular expression for the VPN network interface. Run `ifconfig` or `ip -4 a show` while on VPN + # to see the name of the interface. + typeset -g POWERLEVEL9K_VPN_IP_INTERFACE='(gpd|wg|(.*tun)|tailscale)[0-9]*|(zt.*)' + # If set to true, show one segment per matching network interface. If set to false, show only + # one segment corresponding to the first matching network interface. + # Tip: If you set it to true, you'll probably want to unset POWERLEVEL9K_VPN_IP_CONTENT_EXPANSION. + typeset -g POWERLEVEL9K_VPN_IP_SHOW_ALL=false + # Custom icon. + # typeset -g POWERLEVEL9K_VPN_IP_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ###########[ ip: ip address and bandwidth usage for a specified network interface ]########### + # IP color. + typeset -g POWERLEVEL9K_IP_FOREGROUND=4 + # The following parameters are accessible within the expansion: + # + # Parameter | Meaning + # ----------------------+------------------------------------------- + # P9K_IP_IP | IP address + # P9K_IP_INTERFACE | network interface + # P9K_IP_RX_BYTES | total number of bytes received + # P9K_IP_TX_BYTES | total number of bytes sent + # P9K_IP_RX_BYTES_DELTA | number of bytes received since last prompt + # P9K_IP_TX_BYTES_DELTA | number of bytes sent since last prompt + # P9K_IP_RX_RATE | receive rate (since last prompt) + # P9K_IP_TX_RATE | send rate (since last prompt) + typeset -g POWERLEVEL9K_IP_CONTENT_EXPANSION='$P9K_IP_IP${P9K_IP_RX_RATE:+ %2F⇣$P9K_IP_RX_RATE}${P9K_IP_TX_RATE:+ %3F⇡$P9K_IP_TX_RATE}' + # Show information for the first network interface whose name matches this regular expression. + # Run `ifconfig` or `ip -4 a show` to see the names of all network interfaces. + typeset -g POWERLEVEL9K_IP_INTERFACE='[ew].*' + # Custom icon. + # typeset -g POWERLEVEL9K_IP_VISUAL_IDENTIFIER_EXPANSION='⭐' + + #########################[ proxy: system-wide http/https/ftp proxy ]########################## + # Proxy color. + typeset -g POWERLEVEL9K_PROXY_FOREGROUND=2 + # Custom icon. + # typeset -g POWERLEVEL9K_PROXY_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ################################[ battery: internal battery ]################################# + # Show battery in red when it's below this level and not connected to power supply. + typeset -g POWERLEVEL9K_BATTERY_LOW_THRESHOLD=20 + typeset -g POWERLEVEL9K_BATTERY_LOW_FOREGROUND=1 + # Show battery in green when it's charging or fully charged. + typeset -g POWERLEVEL9K_BATTERY_{CHARGING,CHARGED}_FOREGROUND=2 + # Show battery in yellow when it's discharging. + typeset -g POWERLEVEL9K_BATTERY_DISCONNECTED_FOREGROUND=3 + # Battery pictograms going from low to high level of charge. + typeset -g POWERLEVEL9K_BATTERY_STAGES='\uf58d\uf579\uf57a\uf57b\uf57c\uf57d\uf57e\uf57f\uf580\uf581\uf578' + # Don't show the remaining time to charge/discharge. + typeset -g POWERLEVEL9K_BATTERY_VERBOSE=false + + #####################################[ wifi: wifi speed ]##################################### + # WiFi color. + typeset -g POWERLEVEL9K_WIFI_FOREGROUND=4 + # Custom icon. + # typeset -g POWERLEVEL9K_WIFI_VISUAL_IDENTIFIER_EXPANSION='⭐' + + # Use different colors and icons depending on signal strength ($P9K_WIFI_BARS). + # + # # Wifi colors and icons for different signal strength levels (low to high). + # typeset -g my_wifi_fg=(4 4 4 4 4) # <-- change these values + # typeset -g my_wifi_icon=('WiFi' 'WiFi' 'WiFi' 'WiFi' 'WiFi') # <-- change these values + # + # typeset -g POWERLEVEL9K_WIFI_CONTENT_EXPANSION='%F{${my_wifi_fg[P9K_WIFI_BARS+1]}}$P9K_WIFI_LAST_TX_RATE Mbps' + # typeset -g POWERLEVEL9K_WIFI_VISUAL_IDENTIFIER_EXPANSION='%F{${my_wifi_fg[P9K_WIFI_BARS+1]}}${my_wifi_icon[P9K_WIFI_BARS+1]}' + # + # The following parameters are accessible within the expansions: + # + # Parameter | Meaning + # ----------------------+--------------- + # P9K_WIFI_SSID | service set identifier, a.k.a. network name + # P9K_WIFI_LINK_AUTH | authentication protocol such as "wpa2-psk" or "none"; empty if unknown + # P9K_WIFI_LAST_TX_RATE | wireless transmit rate in megabits per second + # P9K_WIFI_RSSI | signal strength in dBm, from -120 to 0 + # P9K_WIFI_NOISE | noise in dBm, from -120 to 0 + # P9K_WIFI_BARS | signal strength in bars, from 0 to 4 (derived from P9K_WIFI_RSSI and P9K_WIFI_NOISE) + + ####################################[ time: current time ]#################################### + # Current time color. + typeset -g POWERLEVEL9K_TIME_FOREGROUND=6 + # Format for the current time: 09:51:02. See `man 3 strftime`. + typeset -g POWERLEVEL9K_TIME_FORMAT='%D{%I:%M %p}' + # If set to true, time will update when you hit enter. This way prompts for the past + # commands will contain the start times of their commands as opposed to the default + # behavior where they contain the end times of their preceding commands. + typeset -g POWERLEVEL9K_TIME_UPDATE_ON_COMMAND=false + # Custom icon. + typeset -g POWERLEVEL9K_TIME_VISUAL_IDENTIFIER_EXPANSION= + # Custom prefix. + # typeset -g POWERLEVEL9K_TIME_PREFIX='%fat ' + + # Example of a user-defined prompt segment. Function prompt_example will be called on every + # prompt if `example` prompt segment is added to POWERLEVEL9K_LEFT_PROMPT_ELEMENTS or + # POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS. It displays an icon and green text greeting the user. + # + # Type `p10k help segment` for documentation and a more sophisticated example. + function prompt_example() { + p10k segment -f 2 -i '⭐' -t 'hello, %n' + } + + # User-defined prompt segments may optionally provide an instant_prompt_* function. Its job + # is to generate the prompt segment for display in instant prompt. See + # https://github.com/romkatv/powerlevel10k#instant-prompt. + # + # Powerlevel10k will call instant_prompt_* at the same time as the regular prompt_* function + # and will record all `p10k segment` calls it makes. When displaying instant prompt, Powerlevel10k + # will replay these calls without actually calling instant_prompt_*. It is imperative that + # instant_prompt_* always makes the same `p10k segment` calls regardless of environment. If this + # rule is not observed, the content of instant prompt will be incorrect. + # + # Usually, you should either not define instant_prompt_* or simply call prompt_* from it. If + # instant_prompt_* is not defined for a segment, the segment won't be shown in instant prompt. + function instant_prompt_example() { + # Since prompt_example always makes the same `p10k segment` calls, we can call it from + # instant_prompt_example. This will give us the same `example` prompt segment in the instant + # and regular prompts. + prompt_example + } + + # User-defined prompt segments can be customized the same way as built-in segments. + # typeset -g POWERLEVEL9K_EXAMPLE_FOREGROUND=208 + # typeset -g POWERLEVEL9K_EXAMPLE_VISUAL_IDENTIFIER_EXPANSION='⭐' + + # Transient prompt works similarly to the builtin transient_rprompt option. It trims down prompt + # when accepting a command line. Supported values: + # + # - off: Don't change prompt when accepting a command line. + # - always: Trim down prompt when accepting a command line. + # - same-dir: Trim down prompt when accepting a command line unless this is the first command + # typed after changing current working directory. + typeset -g POWERLEVEL9K_TRANSIENT_PROMPT=same-dir + + # Instant prompt mode. + # + # - off: Disable instant prompt. Choose this if you've tried instant prompt and found + # it incompatible with your zsh configuration files. + # - quiet: Enable instant prompt and don't print warnings when detecting console output + # during zsh initialization. Choose this if you've read and understood + # https://github.com/romkatv/powerlevel10k#instant-prompt. + # - verbose: Enable instant prompt and print a warning when detecting console output during + # zsh initialization. Choose this if you've never tried instant prompt, haven't + # seen the warning, or if you are unsure what this all means. + typeset -g POWERLEVEL9K_INSTANT_PROMPT=quiet + + # Hot reload allows you to change POWERLEVEL9K options after Powerlevel10k has been initialized. + # For example, you can type POWERLEVEL9K_BACKGROUND=red and see your prompt turn red. Hot reload + # can slow down prompt by 1-2 milliseconds, so it's better to keep it turned off unless you + # really need it. + typeset -g POWERLEVEL9K_DISABLE_HOT_RELOAD=true + + # If p10k is already loaded, reload configuration. + # This works even with POWERLEVEL9K_DISABLE_HOT_RELOAD=true. + (( ! $+functions[p10k] )) || p10k reload +} + +# Tell `p10k configure` which file it should overwrite. +typeset -g POWERLEVEL9K_CONFIG_FILE=${${(%):-%x}:a} + +(( ${#p10k_config_opts} )) && setopt ${p10k_config_opts[@]} +'builtin' 'unset' 'p10k_config_opts' diff --git a/.zsh/.zsh_plugins.txt b/.zsh/.zsh_plugins.txt new file mode 100644 index 0000000..f97a067 --- /dev/null +++ b/.zsh/.zsh_plugins.txt @@ -0,0 +1,9 @@ +zsh-users/zsh-autosuggestions +zsh-users/zsh-syntax-highlighting +zsh-users/zsh-completions + +# todo is this better than zsh-autocomplete below? +# Aloxaf/fzf-tab +# marlonrichert/zsh-autocomplete + +romkatv/powerlevel10k diff --git a/.zsh/.zshrc b/.zsh/.zshrc new file mode 100644 index 0000000..c6f75d3 --- /dev/null +++ b/.zsh/.zshrc @@ -0,0 +1,68 @@ +# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zsh/.zshrc. +# Initialization code that may require console input (password prompts, [y/n] +# confirmations, etc.) must go above this block; everything else may go below. +if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then + source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" +fi + +# Aliases +alias c='clear' +alias open='xdg-open' +alias lg="lazygit" +alias nv="nvim" + +alias ts="tmux new-session -A -s" +alias tl="tmux ls" + +# Completions +fpath=($HOME/.zsh/completions $fpath) +autoload -U compinit; compinit +_comp_options+=(globdots) # With hidden + +# Load antidote & plugins +source ${ZDOTDIR}/antidote/antidote.zsh +antidote load + +# fzf keybindings +if type rg &> /dev/null; then + export FZF_DEFAULT_COMMAND='rg --files' + export FZF_DEFAULT_OPTS='-m --height 50% --border' +fi +source /usr/share/doc/fzf/examples/completion.zsh +source /usr/share/doc/fzf/examples/key-bindings.zsh + +# ----------------- Replacement for standard tools ----------------- # +# ls -> eza aliases +# https://gist.github.com/AppleBoiy/04a249b6f64fd0fe1744aff759a0563b +# TODO: https://denisrasulev.medium.com/eza-the-best-ls-command-replacement-9621252323e +alias ls='eza' +alias l='eza -lbF --git' +alias ll='eza -lbGF --git' +alias llm='eza -lbGd --git --sort=modified' +alias la='eza -lbhHigUmuSa --time-style=long-iso --git --color-scale' +alias lx='eza -lbhHigUmuSa@ --time-style=long-iso --git --color-scale' +# specialty views +alias lS='eza -1' +alias lt='eza --tree --level=2' +alias l.="eza -a | grep -E '^\.'" + +# cd -> zoxide +eval "$(zoxide init zsh)" +alias cd="z" +alias cdi="zi" + +# man -> tldr +# No alias + +# cat -> bat +export BAT_THEME="base16" +export BAT_STYLE="numbers,changes,header" +alias cat="bat" +alias -g -- -h='-h 2>&1 | bat --language=help --style=plain' +alias -g -- --help='--help 2>&1 | bat --language=help --style=plain' + +# direnv hook +eval "$(direnv hook zsh)" + +# To customize prompt, run `p10k configure` or edit ~/.zsh/.p10k.zsh. +[[ ! -f ~/.zsh/.p10k.zsh ]] || source ~/.zsh/.p10k.zsh diff --git a/.zsh/bd.zsh b/.zsh/bd.zsh new file mode 100644 index 0000000..1082ca6 --- /dev/null +++ b/.zsh/bd.zsh @@ -0,0 +1,88 @@ +# shellcheck shell=bash +bd () { + (($#<1)) && { + printf -- 'usage: %s \n' "${0}" + printf -- ' %s \n' "${0}" + + return 1 + } >&2 + + local requestedDestination="${1}" + local -a parents=(${(ps:/:)"${PWD}"}) + local numParents + local dest + local i + local parent + + # prepend root to the parents array + parents=('/' "${parents[@]}") + + # Remove the current directory since it isn't a parent + shift -p parents + + # Get the number of parent directories + numParents="$(( ${#parents[@]}))" + + # Build dest and 'cd' to it by looping over the parents array in reverse + dest='./' + for i in $(seq "${numParents}" -1 1); do + parent="${parents[${i}]}" + dest+='../' + + if [[ "${requestedDestination}" == "${parent}" ]]; then + cd $dest + + return $? + fi + done + + # If the user provided an integer, go up as many times as asked + dest='./' + if [[ "${requestedDestination}" == <-> ]]; then + if [[ "${requestedDestination}" -gt "${numParents}" ]]; then + printf -- '%s: Error: Can not go up %s times (not enough parent directories)\n' "${0}" "${requestedDestination}" + return 1 + fi + + for i in {1.."${requestedDestination}"}; do + dest+='../' + done + + cd "${dest}" + + return $? + fi + + # If the above methods fail + printf -- '%s: Error: No parent directory named "%s"\n' "${0}" "${requestedDestination}" + return 1 +} + +_bd () { + # Get parents (in reverse order) + local localMatcherList + local -a parents=(${(ps:/:)"${PWD}"}) + local numParents + local i + local -a parentsReverse + + zstyle -s ':completion:*' 'matcher-list' 'localMatcherList' + + # prepend root to the parents array + parents=('/' "${parents[@]}") + + # Remove the current directory since it isn't a parent + shift -p parents + + # Get the number of parent directories + numParents="$(( ${#parents[@]}))" + + parentsReverse=() + for i in $(seq "${numParents}" -1 1); do + parentsReverse+=("${parents[${i}]}") + done + + compadd -V 'Parent directories' -M "${localMatcherList}" "$@" -- "${parentsReverse[@]}" +} + +compdef _bd bd diff --git a/.zsh/completion.zsh b/.zsh/completion.zsh new file mode 100644 index 0000000..c15d6b4 --- /dev/null +++ b/.zsh/completion.zsh @@ -0,0 +1,102 @@ + # ____ ___ __ __ ____ _ _____ _____ ___ ___ _ _ +# / ___/ _ \| \/ | _ \| | | ____|_ _|_ _/ _ \| \ | | +# | | | | | | |\/| | |_) | | | _| | | | | | | | \| | +# | |__| |_| | | | | __/| |___| |___ | | | | |_| | |\ | +# \____\___/|_| |_|_| |_____|_____| |_| |___\___/|_| \_| + # + +# +---------+ +# | General | +# +---------+ + +# source ./gambit.zsh + +# Load more completions +fpath=($DOTFILES/zsh/plugins/zsh-completions/src $fpath) + +# Should be called before compinit +zmodload zsh/complist + +# Use hjlk in menu selection (during completion) +# Doesn't work well with interactive mode +bindkey -M menuselect 'h' vi-backward-char +bindkey -M menuselect 'k' vi-up-line-or-history +bindkey -M menuselect 'j' vi-down-line-or-history +bindkey -M menuselect 'l' vi-forward-char + +bindkey -M menuselect '^xg' clear-screen +bindkey -M menuselect '^xi' vi-insert # Insert +bindkey -M menuselect '^xh' accept-and-hold # Hold +bindkey -M menuselect '^xn' accept-and-infer-next-history # Next +bindkey -M menuselect '^xu' undo # Undo + +autoload -U compinit; compinit +_comp_options+=(globdots) # With hidden files + +# Only work with the Zsh function vman +# See $DOTFILES/zsh/scripts.zsh +compdef vman="man" + +# +---------+ +# | Options | +# +---------+ + +# setopt GLOB_COMPLETE # Show autocompletion menu with globs +setopt MENU_COMPLETE # Automatically highlight first element of completion menu +setopt AUTO_LIST # Automatically list choices on ambiguous completion. +setopt COMPLETE_IN_WORD # Complete from both ends of a word. + +# +---------+ +# | zstyles | +# +---------+ + +# Ztyle pattern +# :completion::::: + +# Define completers +zstyle ':completion:*' completer _extensions _complete _approximate + +# Use cache for commands using cache +zstyle ':completion:*' use-cache on +zstyle ':completion:*' cache-path "$XDG_CACHE_HOME/zsh/.zcompcache" +# Complete the alias when _expand_alias is used as a function +zstyle ':completion:*' complete true + +zle -C alias-expension complete-word _generic +bindkey '^Xa' alias-expension +zstyle ':completion:alias-expension:*' completer _expand_alias + +# Use cache for commands which use it + +# Allow you to select in a menu +zstyle ':completion:*' menu select + +# Autocomplete options for cd instead of directory stack +zstyle ':completion:*' complete-options true + +zstyle ':completion:*' file-sort modification + + +zstyle ':completion:*:*:*:*:corrections' format '%F{yellow}!- %d (errors: %e) -!%f' +zstyle ':completion:*:*:*:*:descriptions' format '%F{blue}-- %D %d --%f' +zstyle ':completion:*:*:*:*:messages' format ' %F{purple} -- %d --%f' +zstyle ':completion:*:*:*:*:warnings' format ' %F{red}-- no matches found --%f' +# zstyle ':completion:*:default' list-prompt '%S%M matches%s' +# Colors for files and directory +zstyle ':completion:*:*:*:*:default' list-colors ${(s.:.)LS_COLORS} + +# Only display some tags for the command cd +zstyle ':completion:*:*:cd:*' tag-order local-directories directory-stack path-directories +# zstyle ':completion:*:complete:git:argument-1:' tag-order !aliases + +# Required for completion to be in good groups (named after the tags) +zstyle ':completion:*' group-name '' + +zstyle ':completion:*:*:-command-:*:*' group-order aliases builtins functions commands + +# See ZSHCOMPWID "completion matching control" +zstyle ':completion:*' matcher-list '' 'm:{a-zA-Z}={A-Za-z}' 'r:|[._-]=* r:|=*' 'l:|=* r:|=*' + +zstyle ':completion:*' keep-prefix true + +zstyle -e ':completion:*:(ssh|scp|sftp|rsh|rsync):hosts' hosts 'reply=(${=${${(f)"$(cat {/etc/ssh_,~/.ssh/known_}hosts(|2)(N) /dev/null)"}%%[# ]*}//,/ })' diff --git a/.zsh/completions/_tldr b/.zsh/completions/_tldr new file mode 100644 index 0000000..b45098c --- /dev/null +++ b/.zsh/completions/_tldr @@ -0,0 +1,51 @@ +#compdef tldr + +_applications() { + local -a commands + if commands=(${(uonzf)"$(tldr --list 2>/dev/null)"//:/\\:}); then + _describe -t commands 'command' commands + fi +} + +_tealdeer() { + local I="-h --help -v --version" + integer ret=1 + local -a args + + args+=( + "($I -l --list)"{-l,--list}"[List all commands in the cache]" + "($I -f --render)"{-f,--render}"[Render a specific markdown file]:file:_files" + "($I -p --platform)"{-p,--platform}'[Override the operating system]:platform:(( + linux + macos + sunos + windows + android + freebsd + netbsd + openbsd + ))' + "($I -L --language)"{-L,--language}"[Override the language settings]:lang" + "($I -u --update)"{-u,--update}"[Update the local cache]" + "($I)--no-auto-update[If auto update is configured, disable it for this run]" + "($I -c --clear-cache)"{-c,--clear-cache}"[Clear the local cache]" + "($I)--pager[Use a pager to page output]" + "($I -r --raw)"{-r,--raw}"[Display the raw markdown instead of rendering it]" + "($I -q --quiet)"{-q,--quiet}"[Suppress informational messages]" + "($I)--show-paths[Show file and directory paths used by tealdeer]" + "($I)--seed-config[Create a basic config]" + "($I)--color[Controls when to use color]:when:(( + always + auto + never + ))" + '(- *)'{-h,--help}'[Display help]' + '(- *)'{-v,--version}'[Show version information]' + '1: :_applications' + ) + + _arguments $args[@] && ret=0 + return ret +} + +_tealdeer \ No newline at end of file diff --git a/.zshenv b/.zshenv new file mode 100644 index 0000000..6bd4d1a --- /dev/null +++ b/.zshenv @@ -0,0 +1,27 @@ +# editor +export ZDOTDIR="$HOME/.zsh" +export EDITOR="nvim" +export VISUAL="nvim" + +# nvim manager +[ -d "$HOME/.local/share/bob" ] && export PATH="$PATH:$HOME/.local/share/bob/nvim-bin" +# cargo +[ -d "$HOME/.cargo" ] && . "$HOME/.cargo/env" +# nvm (https://github.com/nvm-sh/nvm?tab=readme-ov-file#install--update-script) +[ -d "$HOME/.nvm" ] && . "$HOME/.nvm/nvm.sh" # This loads nvm +[ -d "$HOME/.nix-profile" ] && . $HOME/.nix-profile/etc/profile.d/nix.sh +[ -d "$HOME/.pixi" ] && export PATH="$HOME/.pixi/bin:$PATH" + +export VCPKG_ROOT=~/.vcpkg +export PATH=$VCPKG_ROOT:$PATH + +export CMAKE_COLOR_DIAGNOSTICS=ON +export CMAKE_GENERATOR="Ninja" + +# zsh +export HISTFILE=$HOME/.zhistory # History filepath +export HISTSIZE=10000 # Maximum events for internal history +export SAVEHIST=10000 # Maximum events in history file + +# for autocomplete +skip_global_compinit=1